Abstract:Well established understanding of flow boiling heat transfer and its hydrodynamic driving mechanisms have led to the inception of surface geometry augmentation techniques that can enhance thermal-hydraulic performance. Enhancing the flow boiling heat transfer at a reasonable pressure drop enables the deployment of more compact and efficient heat exchangers and thermal systems. To enable ease of manufacturing, simplicity, and reliability, passive augmentation techniques that do not require external stimuli are preferred. In this study, a scalable copper microstructuring technique was developed on both smooth and internally finned 0.25" tubes to investigate how it affects the thermofluidic behavior of relatively higher surface tension water during saturated flow boiling. The internally finned tubes used in this study comprised of 50 fins with a helical angle of 13°. To apply the conformal microstructures on the internal tube surfaces, chemical oxidation via an alkaline mixture was used, resulting in structures having characteristic length scales approaching 200 nm −1 μm. Our results show that microstructuring of plain copper tubes provides a water flow boiling heat transfer coefficient enhancement ranging from 10 % to 90 % compared to untreated specimens for vapor qualities ranging from 0 to 0.1 and mass flow rates ranging from 255 to 485 kg/(m 2 ·s). Augmentation is attributed to the increased roughness of the plain copper tubes that creates additional nucleation sites for enhanced liquid entrapment and increases wettability. Associated with this heat transfer augmentation is an increased pressure drop ranging from 0.5 % to 38 % relative to untreated tubes due to the increased skin friction as well as add fluid flow disruption. Overall, the performance factor ranged between 0.86 to 1.81 demonstrating that the augmentation in heat transfer overshadowed the increase in pressure drop. Interestingly, applying the conformal microstructures on internally finned copper tubes decreased the heat transfer coefficient and pressure drop by as much as 75 % and 45 %, respectively, when compared to the un-structured finned copper tubes counterparts. The decrease in heat transfer performance and pressure drop was attributed to partial wetting of the fin roots due to the presence of a vapor layer near the inner tube walls. Our work develops a mechanistic understanding of the role that microstructures play during flow boiling of water on industrially applicable smooth and finned tube geometries and designs.

Flow-Induced Deformation of a Flexible Thin Structure as Manifestation of Heat Transfer Enhancement

Numerical study of Heat Transfer Enhancement by Deformable Twin Plates in Laminar Heated Channel flow

Heat transfer enhancement of a cylinder by flexible fins in turbulent flow

Computational Modeling and Analysis of Flow-induced Vibration of an Elastic Splitter Plate Using a Sharp-interface Immersed Boundary Method

Thermal Cooling Enhancements in a Heated Channel Using Flow-Induced Motion

Two-Fluid Marangoni–Bénard Convection with a Deformable Interface

Thermal energy transport in stratified 2D-Casson fluid flow over an inclined exponentially stretching surface with Soret/Dufour effects: Numerical simulations and applications in energy harvesting

A sharp MLS penalty immersed finite element method for fluid-structure interaction of highly deformable slender body in turbulent flow

Non-Newtonian fluid–structure interactions: Static response of a microchannel due to internal flow of a power-law fluid

Effects of Flow-Induced Vibration on Forced Convection Heat Transfer from Two Tandem Circular Cylinders in Laminar Flow

Saturated water flow boiling heat transfer and pressure drop in scalably microstructured plain and finned copper tubes

Onset about isothermal flow of Carreau liquid over converging channel with Cattaneo-Christov heat and mass fluxes

Dynamic simulation of unsteady Casson–Carreau fluid flow considering temperature-dependent variable-properties and thermo-solutal mixed convection over flat and slendering sheets

A Fluid-Structure Interaction Solver for Compressible Flows with Applications in Blast Loading on Thin Elastic Structures

Immersed boundary method based fluid–structure–thermal interaction solver with conjugate heat transfer

Effect of Deformable Baffle on the Mixed Convection of Non-Newtonian Fluids in a Channel-Cavity

Numerical Study on Flow and Heat Transfer Performance of Rectangular Heat Sink with Compound Heat Transfer Enhancement Structures

Numerical investigation of the effects of variable fluid properties on cilia-driven flow of tangent hyperbolic fluid in a channel with heat and mass transfer: A new approach to microfluidic pumps

Thin film flow of chemically reactive nonlinear thermally radiative magnetized variable viscosity fluid over a stretchable surface with non-uniform heat source/sink and Fick's mass flux theory

Dynamic interactions between an aerodynamic flow and a flexible flat plate

Enhancement in Thermal Energy and Solute Particles Using Hybrid Nanoparticles by Engaging Activation Energy and Chemical Reaction over a Parabolic Surface via Finite Element Approach