Abstract:In this paper, we reviewed recent systematic studies of using ZnO nanotetrapods for photoanodes of dye-sensitized solar cells (DSSCs) in our group. First, the efficiency of power conversion was obtained by more than 3.27% by changes of conditions of dye loading and film thickness of ZnO nanotetrapod. Short-circuit photocurrent densities (J sc) increased with the film thickness, J sc would not be saturation even the film thickness was greater than 35 μm. The photoanode architecture had been charactered by good crystallinity, network forming ability, and limited electron-hopping interjunctions. Next, DSSCs with high efficiency was devised by infiltrating SnO2 nanoparticles into the ZnO nanotetrapods photoanodes. Due to material advantages of both constituents described as above, the composite photoanodes exhibited extremely large roughness factors (RF s), good charge collection, and tunable light scattering properties. By varying the composition of the composite photoanodes, we had achieved an efficiency of 6.31% by striking a balance between high efficiency of charge collection for SnO2 nanoparticles rich films and high light scattering ability for ZnO nanotetrapods rich films. An ultrathin layer of ZnO was found to form spontaneously on the SnO2 nanoparticles, which primarily was responsible for enhancing open-circuit photovoltage (V oc). We also identified that recombination in SnO2/ZnO composite films was mainly determined by ZnO shell condition on SnO2, whereas electron transport was greatly influenced by the morphologies and sizes of ZnO crystalline additives. Finally, we applied the composite photoanodes of SnO2 nanoparticles/ZnO nanotetrapods to flexible DSSCs by low temperature technique of “acetic acid gelation-mechanical press-ammonia activation.” The efficiency has been achieved by 4.91% on ITO-coated polyethylenenaphtalate substrate. The formation of a thin ZnO shell on SnO2 nanoparticles, after ammonia activation, was also found to be critical to boosting V oc and to improving inter-particles contacts. Mechanical press, apart from enhancing film durability, also significantly improved charge collection. ZnO nanotetrapods had been demonstrated to be a better additive than ZnO particles for the improvement of charge collection in SnO2/ZnO composite photoanodes regardless of whether they were calcined.

High-Efficiency Dye-Sensitized Solar Cells Based on the Composite Photoanodes of SnO2 Nanoparticles/ZnO Nanotetrapods

High-efficiency Dye-Sensitized Solar Cells Based on the Composite Photoanodes of SnO2 Nanoparticles/zno Nanotetrapods.

Dye-sensitized solar cells based on ZnO nanotetrapods

ZnO/Ti3C2Tx Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Photoelectric Performance Optimization of Dye-Sensitized Solar Cells Based on ZnO-TiO2 Composite Nanofibers

ZnO/TiO2 Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

A new ZnO nanotetrapods/SnO2 nanoparticles composite photoanode for high efficiency flexible dye-sensitized solar cells.

Multifunctional Composite Photoanode Containing a TiO 2 Microarchitecture with Near-Infrared Upconversion Nanoparticles for Dye-Sensitized Solar Cells

Unique Zn-Doped Sno2 Nano-Echinus with Excellent Electron Transport and Light Harvesting Properties As Photoanode Materials for High Performance Dye-Sensitized Solar Cell

DSSCs Using a Nanoparticle/Nanorod Composite TiO<sub>2</sub> Film As a Photoanode

Synthesis of zinc oxide and tin oxide (ZnO/SnO2) nanocomposite for photoanode applications in dye sensitized solar cell

Nanostructured SnO2 Photoanode-Based Dye-Sensitized Solar Cells

Improvement of performance of dye-sensitized solar cell by using composite nanoparticulate photoelectrode films

ZnO nanocones with high-index {101̄1} facets for enhanced energy conversion efficiency of dye-sensitized solar cells

ZnO Nanocones with High-Index {101̅1} Facets for Enhanced Energy Conversion Efficiency of Dye-Sensitized Solar Cells

An Efficient DSSC Based on ZnO Nanowire Photo-Anodes and a New D-π-A Organic Dye

Porous ZnO Nanosheet Arrays Constructed on Weaved Metal Wire for Flexible Dye-Sensitized Solar Cells.

An Efficient Dye-Sensitive Solar Cell Based on Ag2O/ZnO Natural Dyes Modified by Gold Nanoparticles

Research on Photovoltaic Measurement and Electrochemical Impedance Spectroscopy Analysis of Dye-Sensitized Solar Cells With Modification of Photoanodes by TiO2 Nanofibers Composited With Zn2SnO4-SnO2 Under Various Illuminances

Fabrication of Hierarchically Assembled Microspheres Consisting of Nanoporous ZnO Nanosheets for High-Efficiency Dye-Sensitized Solar Cells

Photovoltaic Performance of Dye-Sensitized Solar Cell by Modification of Photoanode With PbTiO 3 –ZnFe 2 O 4 /TiO 2 Nanofibers