Abstract:Sensors detect a change in a physical parameter around them and convert it to a measurable signal that can be construed and analyzed for further applications such as automation, wearable devices, human-machine interfaces, and medical devices, among countless other applications. For example, sensors in the biomedical field help to detect the physiological course of a body. Conventionally sensors are produced using photolithography and screen printing. These conventional methods are limited by the complexity and flexibility in manufacturing the sensors. But, additive manufacturing presents a flexible option to produce the sensors and integrate them into structures as a single unit. This paper shows an extrusion-based 3D printing method to print sensors using conductive filaments. A comb-shaped capacitive sensor was 3D printed using commercially available conductive filament on a 3D printed PLA substrate. Printing two different materials with different properties always remains a challenge in FDM, so this paper also explains the stepwise process for printing a conductive composite material along with a thermoplastic. Further experimental characterization of the filament and sensor was also performed. This paper compares the electrical properties of the feedstock and 3D printed parts to understand the impact of extrusion on the material. A custom-made experimental setup was designed to characterize the sensor. One of the challenges is the low melting point of 3D printed parts, limiting their use to low-power applications. However, most biomedical sensing applications are low power, so these sensors remain suitable for such applications. Hence, in the end, the authors have explored the viability of the integration of these 3D printed sensors with medical implants to manufacture smart biomedical devices.

Fabricating biomedical sensors with thin-film technology

A thin-film temperature sensor based on a flexible electrode and substrate

Recent Advances in the Construction of Flexible Sensors for Biomedical Applications

Development of nanostructured thin film sensors

A Novel Fabrication Methodology for Micromachined Sensor-Arrays with Multi-Thickness Configuration

Photolithography‐Based Microfabrication of Biodegradable Flexible and Stretchable Sensors

Research about functions, fabrications and applications of the microstructures in sensors

Thin-film implants for bioelectronic medicine

Thin Film Diamond Sensor Technology

Flexible tactile sensors with biomimetic microstructures: Mechanisms, fabrication, and applications

Design and 3D printing of a capacitive sensor for biomedical applications

Liquid Metal Printed Biosensor

A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors

Recent Developments in the Design and Fabrication of Electrochemical Biosensors Using Functional Materials and Molecules

Review of Materials and Fabrication Methods for Flexible Nano and Micro-Scale Physical Property Sensors

Advances in Ultrathin Soft Sensors, Integrated Materials, and Manufacturing Technologies for Enhanced Monitoring of Human Physiological Signals

Functional biomaterials towards flexible electronics and sensors

On 3D printed biomedical sensors for non-enzymatic glucose sensing applications

Recent Advances in 3D Printed Sensors: Materials, Design, and Manufacturing

Scalably Nanomanufactured Atomically Thin Materials‐Based Wearable Health Sensors

Review of Materials and Fabrication Methods for Flexible Nano and Micro-Scale Physical and Chemical Property Sensors