Abstract:Slurry transport has become a subject of interest in several industries, including oil and gas. The importance of slurry/solid transport in the oil and gas industry is evident in areas of cuttings transport, sand transport and, lately, hydrates. Hydrate formation, if not properly monitored and controlled, may lead to pipeline blockage. To avoid pipeline blockage and other hydrate formation risks, chemical additives are added to the system. Additives such as anti-agglomerants help improve hydrate transportability by dispersing the formed hydrates into slurries and preventing them from sticking to the pipe wall. This enables transportation of highly concentrated slurries. However, the high hydrate volume fractions (HVF) slurries may exhibit complex rheology. There is therefore a great need to correlate flow properties such as friction factor and viscosity to HVF. Hydrate slurry transport is important whether hydrates are deliberately generated for energy storage purposes or hydrates formed because of the prevailing flow conditions. However, when determining the viscosity of a fluid containing solid particles, the conventional viscometer types such as concentric cylinders and cone and plate are often not suitable. This is because either the narrow gap would not accommodate the particle size or their inability to maintain the particles suspended leading to bed formation. In this work, a high-pressure mixer-type viscometer was used to generate and characterize hydrate slurries. This work aims to generate a significant amount of hydrate slurry characterization data that may be used as basis for better rheometer designs, hydrate slurry flow properties modeling or integration of hydrate transportability into general multiphase modeling. Results showed that intermediate watercuts posed the greatest pipeline plugging risk for all the oils tested. The amount of transportable hydrates increased with oil viscosity. Generally, hydrate slurries generated exhibited shear thinning behavior that increased with increasing hydrate volume fraction. However, the overall rheology of these slurries is a complex function of the oil used, watercut, gas added to the system and hydrate solid fraction. Lowering shear rates for high HVF systems resulted in separation. Results in this work further suggest that hydrate transportation may be possible with minimum risk if anti-agglomerants are used and high enough shear is applied. On the other hand, if no anti-agglomerant is used, severe aggregation may result in flow line plugging.

Dynamic Viscosity of Methane and Carbon Dioxide Hydrate Systems from Pure Water at High-Pressure Driving Forces

Effects of Poly(vinylpyrrolidone) on the Dynamic Viscosity of Methane Hydrate Systems at High-Pressure Driving Forces: Investigation of Concentration, Molecular Weight, and Shear Rate

Dynamic Viscosity of Methane Hydrate Systems from Non-Einsteinian, Plasma-Functionalized Carbon Nanotube Nanofluids

All-Atom Molecular Dynamics of Pure Water–Methane Gas Hydrate Systems under Pre-Nucleation Conditions: A Direct Comparison between Experiments and Simulations of Transport Properties for the Tip4p/Ice Water Model

Direct Measurement of Pore Gas Pressure and Water/gas Phase Transitions During Methane Hydrate Dissociation

Non-Einsteinian Viscosity Behavior in Plasma-Functionalized Graphene Nanoflake Nanofluids and their Effect on the Dynamic Viscosity of Methane Hydrate Systems

Molecular dynamics predictions of transport properties for carbon dioxide hydrates under pre-nucleation conditions using TIP4P/Ice water and EPM2, TraPPE, and Zhang carbon dioxide potentials

Effects of Poly(styrene/pentafluorostyrene-block-vinylpyrrolidone) Amphiphilic Kinetic Hydrate Inhibitors on the Dynamic Viscosity of Methane Hydrate Systems at High-Pressure Driving Forces

Study on rheological properties of natural gas hydrate slurry

Pressure Dependence of Viscosity of Rhyolitic Melts

In Situ High-Pressure Nmr Observations on the Formation and Dissociation of Methane Hydrate

Molecular dynamics characterization of the interfacial structure and forces of the methane-ethane sII gas hydrate interface

Direct Measurement of Hydrate Equilibrium Temperature in CO 2 and CO 2 Rich Fluids with Low Water Content

Volumetric behaviour of (carbon dioxide + hydrocarbon) mixtures at high pressures

Micromechanical cohesion force between gas hydrate particles measured under high pressure and low temperature conditions.

Structural Stability of Methane Hydrate at High Pressures

Thermodynamic characteristics of methane hydrate formation in high-pressure microcalorimeter under different reaction kinetics

The Effect of Hydrate Formation Conditions on the Mechanics of Laboratory Methane Hydrate‐Bearing Sediments

Formation Characteristics of Carbon Dioxide Hydrate in a High-pressure Flow Loop

Experimental investigation of hydrate formation, plugging and flow properties using a high-pressure viscometer with helical impeller

Effect of pressure on the carbon dioxide hydrate-water interfacial free energy along its dissociation line