Abstract:Teleoperated manipulation under the human intelligence is an effective solution to confront complicated tasks in unknown environments. However, the uncertain contact in environments is the main challenge to achieve good teleoperation, and some inevitable issues such as nonlinearities, various uncertainties, constraints, and communication delays in local and remote robots should also be taken into account. In this article, a unified contact model is proposed to be the targeted environment interaction for remote robot, which can cover various conditions such as free motion and rigid contact by setting different model parameters. Subsequently, a hybrid motion/force controller is developed to cope with nonlinearities and various uncertainties by adaptive robust technique, thus guaranteeing system stability and good transient convergence to the unified contact model. Particularly, to handle misteleoperation or sudden change of conditions described in unified contact model, a model predictive control-based contact optimization method is developed to be the outer loop of hybrid motion/force controller, which plans the desired motion and force trajectories that meet the state and targeted interaction constraints. By the estimation and transmission of environment parameter, the environment dynamics is reconstructed in the local side, which provides the effective force feedback of remote contact environment for human operator. Since the signal transmitted is replaced by the estimated environment parameter, the power-cycle in communication channel is eliminated. This design can avoid the passivity stability problem caused by communication delays, so the stability and good transparency under delays can be guaranteed by the separate design of local and remote controllers. The comparative experiments are implemented and verify the effectiveness of proposed framework for teleoperated manipulation.

Model-Free Synchronous Motion Generation of Multiple Heterogeneous Continuum Robots

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Unified Contact Model and Hybrid Motion/force Control for Teleoperated Manipulation in Unknown Environments

Behavior-predefined adaptive control for heterogeneous continuum robots

Coordinated Motion Control of Mobile Self-Reconfigurable Robots in Virtual Rigid Framework

Model-free motion control of continuum robots based on a zeroing neurodynamic approach

A Model-Free Synchronous Control of Humanoid Robot Finger

Generalized Flexible Hybrid Cable-Driven Robot (HCDR): Modeling, Control, and Analysis

Dynamic modeling and validation of a hybrid-driven continuum robot with antagonistic mechanisms

Hybrid Rigid-Continuum Dual-Arm Space Robots: Modeling, Coupling Analysis, and Coordinated Motion Planning

Design and validation of a fuzzy logic controller for multi-section continuum robots

Design and control of a multi-mobile-robot cooperative transport system based on a novel six degree-of-freedom connector

Kinematic Modeling and Control of Variable Curvature Soft Continuum Robots

Composite Cooperative Synchronization and Decentralized Learning of Multi-Robot Manipulators with Heterogeneous Nonlinear Uncertain Dynamics.

Simplified Kinematics of Continuum Robot Equilibrium Modulation via Moment Coupling Effects and Model Calibration

A Survey on Design, Actuation, Modeling, and Control of Continuum Robot

Modeling, Cooperative Planning and Compliant Control of Multi-arm Space Continuous Robot for Target Manipulation

A Hierarchical Control Strategy for a Rigid–Flexible Coupled Hexapod Bio-Robot

Adaptive Synchronization Control of Cable-Driven Parallel Robots with Uncertain Kinematics and Dynamics

Kinematic models for Cable-driven Continuum Robots with multiple segments and varying cable offsets

An optimization framework for simulation and kinematic control of Constrained Collaborative Mobile Agents (CCMA) system