Design and control of a multi-mobile-robot cooperative transport system based on a novel six degree-of-freedom connector

Zhao Gong,Zhenguo Nie,Quan Liu,Xin-Jun Liu
DOI: https://doi.org/10.1016/j.isatra.2023.04.006
IF: 7.3
2023-04-16
ISA Transactions
Abstract:Highlights • A multi-robot cooperative transport system suitable for uneven roads is designed. • A trajectory tracking controller appropriate for the measurement uncertainty is designed for the mobile robot based on Lyapunov's second method. • A self-calibration method is developed to determine the initial relative positions and orientations among the robots and the payload. • A centralized cooperative strategy is achieved based on the self-calibration method and the trajectory tracking controller. • A decentralized cooperative strategy based on an admittance controller is proposed with the noise of the interaction forces suppressed by a median filter. Multi-robot cooperative object transport on uneven roads is challenging. The key barrier is dealing with nonholonomic and rigid-formation motion constraints. In this study, to alleviate the influence of these constraints on a multi-robot cooperative transport system (MRCTS), a six degree-of-freedom connector capable of sensing three-axial displacements, three-axial forces, and three-axial angular displacements is designed and employed. Based on the local displacements derived from each connector, we develop a position calibration method to calculate the relative position of each robot and achieve a centralized control strategy. Based on the forces sensed by each connector, we design a decentralized control strategy to accomplish cooperative transport in which a leader robot guides the follower robots toward a destination by applying forces, instead of centralized information broadcasting. The experimental results show that the MRCTS works well on an uneven surface, and the tracking errors are within the design stroke of the connectors, demonstrating the effectiveness of the design and control methods of the MRCTS.
automation & control systems,instruments & instrumentation,engineering, multidisciplinary
What problem does this paper attempt to address?