Abstract:Polymer flooding has proved an effective technique to improve development efficiency in heterogeneous reservoirs. Previously, operators usually employed continuous injection of large polymer slugs. However, problems existed including premature injection profile reversal during development, ineffective circulation of polymer solution in low-permeability zones, and excessive polymer consumption in the late development stage. The paper proposed a combination method, named as polymer-alternating-water (PAW), to solve the issues of traditional polymer flooding. The characteristic of this method is injecting water slugs between polymer slugs during the polymer flooding process. At present, research on the PAW technique is limited, with the operational parameters, oil recovery mechanisms, and applicability under various reservoir conditions remaining unclear. In this work, a numerical polymer flooding model is developed using the commercial CMG-STARS reservoir simulation module to investigate the oil displacement performance of PAW. Numerical simulations are performed to determine the optimal parameters for maximizing oil recovery factor. The results indicated compared with continuous polymer flooding, PAW shows multiple peaks in daily oil production rate, with a significantly decreased decline rate, resulting in a 1.47% increase in recovery factor. Under different reservoir conditions including mean permeability, heterogeneity, and crude oil viscosity, PAW can achieve further improvements on the basis of continuous polymer flooding. Polymer adsorption and injection concentration significantly impact the recovery factor, requiring further optimization for field applications. In this study, better polymer flooding performance was achieved when the number of alternating cycles of PAW was 2, and the injected alternating water slug volume was 50%. This study contributes to a deeper understanding of the key mechanisms and parameters in PAW enhanced oil recovery process, thereby providing guidance for the further optimization and field application of this technique.

Influence of the Injection Scheme on the Enhanced Oil Recovery Ability of Heterogeneous Phase Combination Flooding in Mature Waterflooded Reservoirs.

Synergistic mechanism of well pattern adjustment and heterogeneous phase combined flooding on enhancing oil recovery in mature fault-block reservoirs

Research on Heterogeneous Compound Flooding System Based on Dispersed Particle Gel

Experimental Study on Enhanced Oil Recovery of PPG/ASP Heterogeneous System after Polymer Flooding

A NEW IDEA FOR IMPROVING WATER FLOOD EOR IN HETEROGENEOUS MEDIUM SANDSTONE OIL FIELD

Study on Enhanced Oil Recovery Mechanism of CO 2 Miscible Flooding in Heterogeneous Reservoirs under Different Injection Methods

A New Method for Optimizing Water-Flooding Strategies in Multi-Layer Sandstone Reservoirs

Optimized polymer enhanced foam flooding for ordinary heavy oil reservoir after cross-linked polymer flooding

Experimental Investigation of Preformed Particle Gel and Alkali-Surfactant-Polymer Composite System for Enhanced Oil Recovery in Heterogeneous Reservoirs

Experimental Study on Enhanced Oil Recovery of the Heterogeneous System after Polymer Flooding

The Synergistic Effect of Branched-Preformed Particle Gel and Hydrolyzed Polyacrylamide on Further-Enhanced Oil Recovery after Polymer Flooding

Using Cyclic Injection-production Technology to Improve the Development Effect of Water Flooding in Ultra-high Water Cut Stage

Experimental study of nanoparticle and surfactant stabilized emulsion flooding to enhance heavy oil recovery

Insights into Enhanced Oil Recovery by Polymer-Viscosity Reducing Surfactant Combination Flooding in Conventional Heavy Oil Reservoir

Study on Microscopic Oil Displacement Mechanism of Alkaline-Surfactant-Polymer Ternary Flooding

Pore-Scale Simulation of Particle Flooding for Enhancing Oil Recovery

Insights into the Injectivity and Propagation Behavior of Preformed Particle Gel (PPG) in a Low–Medium-Permeability Reservoir

Using polymer-alternating-water to maximize polymer flooding performance

Investigation of the plugging capacity and enhanced oil recovery of flexible particle three-phase foam

Influence of Well Pattern Type on Remaining Oil Saturation and Distribution after Development

Effect of Reservoir Heterogeneity on Polymer–Surfactant Binary Chemical Flooding Efficiency in Conglomerate Reservoirs