Abstract:In this study, a six-degree-of-freedom (6-DOF) motion platform is utilized to simulate the transverse rolling motion of aquaculture tanks aboard deep-sea aquaculture vessels. It examines the effects of different inlet configurations (single and four-pipe inlet), rolling motions (amplitude Θ and period T ), and inlet pipe jet angles α (the acute angle between the jet direction of the inlet pipe and the inclined wall to which it is connected) on the self-cleaning capabilities and flow field characteristics of the aquaculture tank. The findings indicate that the waste collection time in the tank is affected by the combined influences of rolling amplitude and period. In the single-pipe inlet configuration, waste collection time increases with the rolling period and initially increases, then decreases with the rolling amplitude. In the four-pipe inlet configuration, waste collection time increases with the rolling period and decreases with the rolling amplitude. Optimal waste collection performance is achieved at α = 45° in both configurations. Regarding flow field characteristics, variations in rolling period and amplitude significantly alter the flow field within the aquaculture tank. In both configurations, as the period decreases and the amplitude increases, the high-velocity regions and the central vortex area within the tank expand, and the average flow velocity of the water also rises. This corresponds to a reduction in waste collection time and an increase in the waste collection rate. In both configurations, the Flow field is most uniform at α = 45°, which corresponds to the highest waste collection capabilities among all jet angles. The results indicate that while decreasing the rolling period and increasing the amplitude can enhance the self-cleaning capabilities, they also lead to excessively rapid water flow velocities. In practical applications, it is important to select appropriate farming areas based on fish suitability and to choose the correct inlet jet angles for different numbers of inlets. The findings can provide theoretical support and a scientific basis for optimizing the flow characteristics and self-cleaning performance of aquaculture vessels under rolling motion and contribute positively to the advancement of deep-sea aquaculture technology.

Factors determining the size of suspended solids in a flow-through fish farm

Effect of Mesh Size on Microscreen Filtration Combined with Foam Fractionation for Solids Removal in Recirculating Aquacultural Seawater

Effects of Flow Velocity on Water Quality and Ammonia Excretion in Recirculating Aquaculture System Culturing Juvenile Largemouth Bass (micropterus Salmoides)

The Effects of Aerator Noise on the Swimming, Feeding, and Growth of Micropterus Salmoides

Particle Size Distribution Mathematical Models and Properties of Suspended Solids in a Typical Freshwater Pond.

The Effect of Ozonation on Particle Size Distribution for Recirculating Aquacultural Seawater: Analysis of Particle Flocculation and Breakup

Applications of Computational Fluid Dynamics to Modeling Hydrodynamics in Tilapia Rearing Tank of Recirculating Biofloc Technology System

Digestibility, growth and excretion response of rainbow trout (Oncorhynchus mykiss Walbaum) to feeds of different ingredient particle sizes

Impact of Stocking Density of Largemouth Bass on the Self-Cleaning Performance of a Circular Aquaculture Tank

Understanding and managing suspended solids in intensive salmonid aquaculture: a review

Effluent treatment for flow through systems and European Environmental Regulations

Effects of mechanical aeration in the waste-treatment cells of split-pond aquaculture systems on water quality

Factors Affecting Benthic Impacts at Scottish Fish Farms

Experimental Study on the Mixing and Dispersing of Floating Particles in Viscous System

Investigation of the Effect of Pumping Depth and Frequency of Flapping Hydrofoil on Suspended Matter Discharge Characteristics

An integrated recirculating aquaculture system (RAS) for land-based fish farming: The effects on water quality and fish production

The Effect of Filtration with Natural Esker Sand on the Removal of Organic Carbon and Suspended Solids from the Effluent of Experimental Recirculating Aquaculture Systems

Evaluation of different management scenarios for trout farm effluents using dynamic water quality modeling

Study on the Influence of Chord Length and Frequency of Hydrofoil Device on the Discharge Characteristics of Floating Matter in Raceway Aquaculture

Sloshing-induced evolution of self-cleaning performance and flow characteristics within a tank installed on an offshore aquaculture vessel

Suspended Materials Affect Particle Size Distribution and Removal of Environmental DNA in Flowing Waters