Abstract:Biofloc technology (BFT) has been widely used in situ tilapia rearing for its benefits such as saving protein-feed and reducing the adverse impacts on environment. And biofloc concentration has huge effect on aquaculture system. More specifically, TSS(total suspend solid) and the uniformity of the biofloc distribution can greatly affect cultured animals on feeding enthusiasm, and high TSS even will threat the survival of breeding objects. In production, because of the biofloc sedimentation, the bottom of traditional BFT system usually extremely high, so the recirculating biofloc technology (RBFT) system has become a hot topic in recent study. To investigate the improvement on biofloc distribution uniformity of RBFT system compared with situ BFT system, an Euler-Euler multi-phase turbulence 3-D model combined with the kinetic theory of granular flow was applied to simulate the solid-liquid-gas three-phase flow in culture ponds of two kinds of BFT system. At first, the tank meshing was finished based on the commercial software Workbenching 15.0. The grid independent validation was done to choose the acceptable mesh. At last, the mesh was imported in numerical simulation software (Fluent) to analyze the velocity contours and streamlines of liquid phase, distribution characters of solid phase in these two models. In this simulation, pressure-based solver and second-order implicit transient formulation were adopted. The boundary conditions of water and air inlet were set as velocity, and their outlet were regard as pressure outlet equated to the local atmospheric pressure. What’s more, according to the SIM-PLE algorithm, pressure-velocity coupling was calculated. The bioflocs were regarded as to be distributed in the bottom initially. Unsteady simulations were performed when all residuals fall below 10-3, while 40 iterations per time step were used to ensure numerical stability. To have an accurate results, third-order monotone upstream-centered schemes for conservation laws (MUSCL) was used. The simulation results show that when the hydraulic retention time (HRT) of RBFT system is 0.45 h, its flow field has an irregularly varying flow directions namely spreading all over the space, and a severe turbulent flow is complex in contrast with BFT system. On one hand, this flow field results in a more homogeneous velocity distribution and less dead zone flow field in recirculating culture pond, and on the other hand, bioflocs are gathering at the main center area, which is beneficial to biofloc recirculating. What is particularly worth mentioning is that there is only a small amount of biofloc’s sedimentation at bottom in recirculating culture pond, and this result can efficiently avoid the anaerobic bacterium’s breeding caused by the biofloc sedimentation at bottom corners of culture ponds. In addition, the solid phase volume fraction is about 0.1 in recirculating culture pond’s model, and this concentration of suspended solid is suitable for growth of cultured aquatic animal like tilapia and shrimp. According to the comparison between simulation value and experimental data, the simulating value’s error is less than 20%, and the simulation results are trustworthy. In conclusion, the study shows that the RBFT system can overcome the disadvantages including uneven distribution of biofloc and too much dead zone in situ BFT system.

Effect of Mesh Size on Microscreen Filtration Combined with Foam Fractionation for Solids Removal in Recirculating Aquacultural Seawater

The Effect of Ozonation on Particle Size Distribution for Recirculating Aquacultural Seawater: Analysis of Particle Flocculation and Breakup

Enhancement of Mariculture Wastewater Treatment Using Moving Bed Biofilm Reactors Filled with Modified Biocarriers: Characterisation, Process Performance and Microbial Community Evaluation

Applications of Computational Fluid Dynamics to Modeling Hydrodynamics in Tilapia Rearing Tank of Recirculating Biofloc Technology System

The Effects of Different Seeding Ratios on Nitrification Performance and Biofilm Formation in Marine Recirculating Aquaculture System Biofilter

Numerical Study of Dense Solid-Liquid Flow in Hydrodynamic Vortex Separator Applied in Recirculating Biofloc Technology System

Effects of Flow Velocity on Water Quality and Ammonia Excretion in Recirculating Aquaculture System Culturing Juvenile Largemouth Bass (micropterus Salmoides)

Synergistic Effects of Micro-electrolysis-Photocatalysis on Water Treatment and Fish Performance in Saline Recirculating Aquaculture System

Biological Denitrification Using Poly(Butylene Succinate) As Carbon Source and Biofilm Carrier for Recirculating Aquaculture System Effluent Treatment

Bacterial Community Analysis of Different Sections of a Biofilter in a Full‐Scale Marine Recirculating Aquaculture System

Solid Phase Distribution Simulation of Culture Pond with Recirculating Biofloc Technology Based on Computational Fluid Dynamics

Enhanced nitrogen removal of aquaculture wastewater in the combined biological aerated filter: the effect of GAC location setting

A Self-Cleaning Micro-Fluidic Chip Biospired by the Filtering System of Manta Rays

Effects of reduced organic matter loading through membrane filtration on the microbial community dynamics in recirculating aquaculture systems (RAS) with Atlantic salmon parr (Salmo salar)

Enhanced biofiltration coupled with ultrafiltration process in marine recirculating aquaculture system: Fast start-up of nitrification and long-term performance

Effects of an electrocoagulation–air flotation–microfiltration pretreatment process on the start-up of a moving bed biofilm reactor: performance and microbial community structure

Mechanism Study on the Effect of Surface Electrical Property on Microbial Membrane Formation Efficiency of TiO2-SiC Composite Filler in Recirculating Aquaculture System

Evaluation of the treatment of aquaculture wastewater by a novel hydrocyclone separation and biofilter

Research on membrane fouling characteristics of the integrated MBR applied to aquacultural wastewater

Parallel filtration for solid-liquid separation: A case study of highly-efficient algal removal under parallel configuration driven by magnetic force

Performance of a sand filter in removal of micro-algae from seawater in aquaculture production systems