Abstract:The need to refuel future missions to Mars and the Moon via in situ resource utilization (ISRU) requires the development of LOX/LCH4 engines, which are complex and expensive to develop and improve. This paper discusses how the use of digital engineering—specifically physics-based modeling (PBM)—can aid in developing, testing, and validating a LOX/LCH4 engine. The model, which focuses on propulsion performance and heat transfer through the engine walls, was created using Siemens' STAR-CCM+ CFD tool. Key features of the model include Eulerian multiphase physics (EMP), complex chemistry (CC) using the eddy dissipation concept (EDC), and segregated solid energy (SSE) for heat transfer. A comparison between the complete GRI 3.0 and Lu's reduced combustion mechanisms was performed, with Lu's mechanism being chosen for its cost-effectiveness and similar output to the GRI mechanism. The model's geometry represents 1/8th of the engine's volume, with a symmetric rotational boundary. The performance of this engine was investigated using NASA's chemical equilibrium analysis (CEA) and STAR-CCM+ simulations, focusing on thrust levels of 125 lbf and 500 lbf. Discrepancies between theoretical predictions and simulations ranged from 1.4% to 28.5%, largely due to differences in modeling assumptions. While NASA CEA has a zero-dimensional, steady-state approach based on idealized conditions, STAR-CCM+ accounts for real-world factors such as multiphase flow, turbulence, and heat loss. For the 125 lbf case, a 9.2% deviation in combustion chamber temperature and a 15.0% difference in thrust were noted, with simulations yielding 113.48 lbf compared to the CEA's 133.52 lbf. In the 500 lbf case, thrust reached 488 lbf, showing a 2.4% deviation from the design target and an 8.6% increase over CEA predictions. Temperature and pressure deviations were also observed, with the highest engine wall temperature at the nozzle throat. Monte Carlo simulations revealed that substituting LNG for LCH4 affects combustion dynamics. The findings emphasize the need for advanced modeling approaches to enhance the prediction accuracy of rocket engine performance, aiding in the development of digital twins for the CROME.

End-to-End Differentiable Model for Optimization of Rocket-Powered Vehicles Including Plume Radiant Emission

Multidisciplinary Design Optimization of Reentry-Powered Hypersonic Vehicles Based on Surrogate Model

An Advanced High Dimensional Model Representation Approach for Internal Combustion Engine Modeling and Optimization

Liquid Rocket Engine Performance Characterization Using Computational Modeling: Preliminary Analysis and Validation

Pseudo-Two-Dimensional Modeling and Validation of a Hybrid Rocket Combustion Chamber

Model Validation and Parametric Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Endothermic Pyrolysis at Supercritical Pressure

Multidimensional Computational Fluid Dynamics Combustion Process Modeling of a 6V150 Diesel Engine

Modeling of Supercritical-Pressure Turbulent Combustion of Hydrocarbon Fuels Using A Modified Flamelet-Progress-Variable Approach

A computational model for the design of a nitrous oxide--paraffin wax hybrid rocket engine

A Numerical Approach to Optimize the Design of a Pintle Injector for LOX/GCH4 Liquid-Propellant Rocket Engine

Automatic adjoint-based design optimization for laminar combustion applications

Drift and afterburning effect on rocket exhaust plume impingement and optimization of deflector

Multi-Objective Optimization Design of Adaptive Cycle Engine with Serpentine 2-D Exhaust System Based on Infrared Stealth

Numerical Analysis of Combustion and Film Cooling in LOx-Methane Rocket Engine

Hybrid Rocket Engine Burnback Simulations Using Implicit Geometry Descriptions

Long-Duration Dynamic Numerical Simulation of Combustion and Flow in Hybrid Rocket Motors Considering Nozzle Erosion

Development of a Fast, Robust Numerical Tool for the Design, Optimization, and Control of IC Engines

Optimization of Thrust of a Generic X-51 Hypersonic Vehicle

Numerical studies on four-engine rocket exhaust plume impinging on flame deflectors with afterburning

Exhaust Plume Simulation of Solid Rocket

Aerothermodynamic Simulators for Rocket Design using Neural Fields