Abstract:Carbon aerogels with excellent compressibility and resilience are attracting considerable attention in broad application prospects for their reversible resilience and resistance to damage from external stress. It is of great interest to explore green and low-cost carbon aerogels from sustainable resources but remains challenging because of the brittleness of carbon blocks. Herein, inspired by the anisotropic architectures in nature, we propose a bottom-up approach for fabricating an anisotropic carbon aerogel with a 3D lamellar structure from cellulose nanofibers. The aligned and continuous lamellar texture with desirable thickness (142 nm) can effectively transfer stress throughout the 3D network and resist the destruction at high compression, and thus, the carbon aerogel exhibits shape recovery from high compression strain and excellent fatigue resistance. The carbon aerogel can withstand extremely high compression strain (95%) for at least 50 cycles or 50,000 cycles at 50% strain with 84% height retention. Moreover, the excellent mechanical performance, stable 3D lamellar architecture, and high conductivity endow the carbon aerogel with rapid current response and high sensitivity in a wide pressure range (0.002–7 kPa). This study introduces the carbon aerogel as an excellent choice for fabricating the 3D tactile sensor to capture various signals of human motions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c02051?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c02051</a>.<a class="ref internalNav" href="#sec2">Experimental Section</a>; height of the CNF; FT-IR spectrum of the CNF; lamellar surfaces of CNF0.45%, CNF1.8%, CNF0.45%–C, and CNF1.8%–C; SEM images of aerogels before annealing; digital photographs of the as-prepared aerogels and carbon aerogels; XRD and Raman patterns of CNFX%–C; microstructures of CNF aerogels (CNF0.9%) before and after annealing; digital photographs of the as-prepared aerogels and carbon aerogels before and after compression; compressibility of CNFX%–C; SEM images of CNFX%–C after 10,000 cycles at 50% strain; lamellar thicknesses of CNFX%–C; R/R0 of CNF0.9%–C and its linear sensitivity; and comparison of pressure detection limit of CNF0.9%–C (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_001.pdf">PDF</a>)Compression at 90% strain for one cycle (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_002.mp4">MP4</a>)Finite element analysis of thin lamella (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_003.mp4">MP4</a>)Finite element analysis of thick lamella (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_004.mp4">MP4</a>)Finite element analysis of compression from the x direction (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_005.mp4">MP4</a>)Finite element analysis of compression from the y direction (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_006.mp4">MP4</a>)Finite element analysis of compression from the z direction (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_007.mp4">MP4</a>)This article has not yet been cited by other publications.

Elastic Aerogel with Tunable Wettability for Self-Cleaning Electronic Skin

Manipulating the elasticity of chemically modified graphene aerogel through water surface plasticization

Silica Aerogels with Self-Reinforced Microstructure for Bioinspired Hydrogels

Superelastic Polymer Aerogel with Superamphiphilicity

Linking Renewable Cellulose Nanocrystal into Lightweight and Highly Elastic Carbon Aerogel

Compressible and conductive multi-scale composite aerogel elastomers for electromagnetic wave absorption, energy harvesting, and piezoresistive sensing

Hydrophobic, elastic and conductive O-BC/MXene aerogel with high sensing performance

Xylan‐Assisted construction of anisotropic aerogel for pressure sensor

Superelastic carbon aerogels with anisotropic and hierarchically-enhanced cellular structure for wearable piezoresistive sensors

A resilient and lightweight cellulose/graphene oxide/polymer-derived multifunctional carbon aerogel generated from Pickering emulsion toward a wearable pressure sensor

Hyperelastic aerogels with anisotropic layer-strut cellular structure for piezoresistive sensor and compressible supercapacitor applications

Multifunctional Superelastic Cellulose Nanofibrils Aerogel by Dual Ice‐Templating Assembly

Anisotropic Carbon Aerogel from Cellulose Nanofibers Featuring Highly Effective Compression Stress Transfer and Pressure Sensing

Highly Stretchable, Self-Healable, Freezing-Tolerant, and Transparent Polyacrylic Acid/Nanochitin Composite Hydrogel for Self-Powered Multifunctional Sensors

Hydrophobic and thermal-insulating aerogels based on rigid cellulose nanocrystal and elastic rubber

A Liquid-Free Conducting Ionoelastomer for 3D Printable Multifunctional Self-Healing Electronic Skin with Tactile Sensing Capabilities

Simple Fabrication of Silica Amino Sphere-Reinforced Ionic Liquids/Graphene Conductive Hydrogel Sensors with Super Toughness, Self-Healing, and Strain Sensitivity Properties

Naturally dried superelastic bioinspired graphene aerogel for pressure/stretch sensing and separation

Superelastic and robust carbonaceous nanofibrous aerogel with high pressure-sensitivity, excellent thermal insulation and high photothermal-conversion efficiency

Lightweight, Superelastic, and Hydrophobic Polyimide Nanofiber /MXene Composite Aerogel for Wearable Piezoresistive Sensor and Oil/Water Separation Applications

A carbon aerogel with super mechanical and sensing performances for wearable piezoresistive sensors