A mechanically strong and ductile soft magnet with extremely low coercivity

Liuliu Han,Fernando Maccari,Isnaldi R. Souza Filho,Nicolas J. Peter,Ye Wei,Baptiste Gault,Oliver Gutfleisch,Zhiming Li,Dierk Raabe

DOI: https://doi.org/10.1038/s41586-022-04935-3

IF: 64.8

2022-08-11

Nature

Abstract:Soft magnetic materials (SMMs) serve in electrical applications and sustainable energy supply, allowing magnetic flux variation in response to changes in applied magnetic field, at low energy loss 1 . The electrification of transport, households and manufacturing leads to an increase in energy consumption owing to hysteresis losses 2 . Therefore, minimizing coercivity, which scales these losses, is crucial 3 . Yet meeting this target alone is not enough: SMMs in electrical engines must withstand severe mechanical loads; that is, the alloys need high strength and ductility 4 . This is a fundamental design challenge, as most methods that enhance strength introduce stress fields that can pin magnetic domains, thus increasing coercivity and hysteresis losses 5 . Here we introduce an approach to overcome this dilemma. We have designed a Fe–Co–Ni–Ta–Al multicomponent alloy (MCA) with ferromagnetic matrix and paramagnetic coherent nanoparticles (about 91 nm in size and around 55% volume fraction). They impede dislocation motion, enhancing strength and ductility. Their small size, low coherency stress and small magnetostatic energy create an interaction volume below the magnetic domain wall width, leading to minimal domain wall pinning, thus maintaining the soft magnetic properties. The alloy has a tensile strength of 1,336 MPa at 54% tensile elongation, extremely low coercivity of 78 A m −1 (less than 1 Oe), moderate saturation magnetization of 100 A m 2 kg −1 and high electrical resistivity of 103 μΩ cm.

multidisciplinary sciences

What problem does this paper attempt to address?

The paper aims to address several key issues faced by soft magnetic materials (SMMs) in electrical applications and sustainable energy supply. Specifically, the research team aims to improve the mechanical strength and ductility of soft magnetic materials while maintaining extremely low coercivity to cope with the severe mechanical loads in electric transportation, household, and manufacturing industries.

Current methods typically enhance material strength by introducing stress fields, but this leads to magnetic domain pinning, increasing coercivity and hysteresis loss. Therefore, the paper proposes a new approach by designing a multi-component alloy (MCA) containing iron-cobalt-nickel-tantalum-aluminum, which includes a ferromagnetic matrix and paramagnetic coherent nanoparticles (average size about 91 nanometers, volume fraction about 55%). These nanoparticles can hinder dislocation motion, thereby enhancing the material's strength and ductility. Due to their small size, low coherent stress, and small magnetostatic energy, they do not significantly affect domain wall movement, maintaining the soft magnetic properties.

Using this method, the researchers successfully developed a new type of soft magnetic material with a tensile strength of 1336 MPa, a tensile elongation of 54%, extremely low coercivity (78 A m^-1), and high resistivity (103 μΩ cm). The design strategy of this material contrasts with traditional soft magnetic material design, which avoids domain wall pinning by using larger particle dispersion rather than the smallest microstructural features, thus achieving an optimized combination of mechanical performance and soft magnetic properties.