Abstract:Recently tetrapod piled jacket (TPJ) foundations are considered as a promising solution for offshore wind turbines in waters with depths ranging from 20 m to 50 m. This paper presents a numerical study into the monotonic lateral loading behaviour of TPJ foundations in medium sand, in terms of overall load-displacement responses of TPJ foundations and internal force within individual corner piles as well as pile-soil interaction. The results of previous centrifuge model tests are used to provide high-quality verification for the development of a 3D finite element model established by ABAQUS. A series of parametric studies is then carried out to look into more detailed response of TPJ foundations subjected to lateral loads, including the influence of spacing and slenderness ratio of piles, loading height as well as soil friction angle. The numerical results show that there are two various deformation models of TPJ foundations during lateral loading. One is shearing dominated deformation model under smaller loads, while another one is overturning dominated model under larger loads. Moreover, the lateral soil-pile interaction is found to be greatly influenced by enhancing/weakening effects of the axial forces of individual piles. The cause of this phenomenon is primarily due to the change in soil stress induced by pile vertical movement and radial deformation. To quantify this effect on pile-soil interaction of TPJ foundation, an enhancement factor Gamma(s), defined as the ratio of the soil resistance on downwind piles to that on upwind piles, is proposed. Consequently, the relationship between Gamma(s), depth of influence zone z(c )and four parameters are carefully investigated. For simplicity, the Gamma(s) is assumed constant and independent with pile lateral deflection as well as soil depths, based on which the values for Gamma(s) and z(c) are recommended for practical design uses. It is highlighted in the present study that these values should be chosen based on the specific loading conditions to provide much safer and more robust design for TPJ foundations.

Scaling laws for the modelling of energy geostructures

Distribution Law Analysis and Calculating Method for Windage Power in a Geotechnical Centrifuge

Bridging The Micro And Macro For Granular Media: A Computational Multi-Scale Paradigm

Centrifuge Modeling of Monotonic and Cyclic Lateral Behavior of Monopiles in Sand

Centrifuge Modelling of Lateral Loading Behaviour of a “Semi-Rigid” Mono-pile in Soft Clay

Centrifuge Modelling for Seismic Response of Single Pile for Wind Turbine Subjected to Lateral Load

Centrifuge Modelling of Lateral Cyclic Behaviour of a Tetrapod Piled Jacket in Soft Clay

A State Parameter-Based Scaling Law for Centrifuge Modelling

Centrifuge Model Tests on Laterally Loaded Piles in Sand

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

A Modified Generalized Scaling Law for the Similitude of Dynamic Strain in Centrifuge Modeling

Centrifuge modelling on tetrapod jacket foundation subjected to lateral loads

Numerical modelling on effect of loading rate on uplift behavior of suction caissons

Centrifuge Modeling of Dynamic Response of High Fill Slope by Using Generalized Scaling Law

Influence of Pile Diameter and Aspect Ratio on the Lateral Response of Monopiles in Sand with Different Relative Densities

Model Tests on the Long-Term Dynamic Performance of Offshore Wind Turbines Founded on Monopiles in Sand

Centrifuge Modelling of Monopiles in Calcareous Sand Subjected to Cyclic Lateral Loading

Remarks on numerical simulation of the LEAP-Asia-2019 centrifuge tests

Numerical Investigation on the Lateral Loading Behaviour of Tetrapod Piled Jacket Foundations in Medium Dense Sand

LEAP-ASIA-2019: Validation of centrifuge experiments and the generalized scaling law on liquefaction-induced lateral spreading

Centrifuge Modelling on Monotonic and Cyclic Lateral Behaviour of Monopiles in Kaolin Clay