Centrifuge Modelling of Monopiles in Calcareous Sand Subjected to Cyclic Lateral Loading

Roozbeh Rezanejad Malakshah,Majid Moradi,Abbas Ghalandarzadeh
DOI: https://doi.org/10.1007/s40999-021-00679-9
IF: 2.184
2021-10-22
International Journal of Civil Engineering
Abstract:Monopiles are the most common foundation type for offshore wind turbines. These structures are subjected to millions of cyclic horizontal loads during their lifespans, mainly from waves and wind; however, there are gaps in conventional design methods for different aspects of cyclic loading. The present study examined the cyclic behaviour of monopiles in dry calcareous sand. Centrifuge tests were carried out to investigate the effect of cyclic loading on the accumulated displacement and soil-pile stiffness. The results showed that asymmetric two-way loading is the most damaging load type, although its difference from one-way loading is less than what has been reported previously. Asymmetric two-way loading was found to cause up to 20% more displacement than one-way loading. Furthermore, the secant stiffness of the soil-pile system increased about 15% after 600 cycles, and a logarithmic function has been provided to describe this trend. The slope of this function increased with the maximum cyclic load magnitude; however, an increase in the cyclic load magnitude decreased the soil-pile stiffness. Moreover, the soil-pile stiffness was considerably lower in symmetric two-way loading compared to other load reversal conditions. After each cyclic test, monotonic loading was applied. In most cases, the post-cyclic lateral capacity was nearly equal to the static capacity. A model is proposed to predict the accumulated displacement under cyclic loading.
engineering, civil
What problem does this paper attempt to address?