Abstract:The scientific task to improve energy efficiency and ensure the process of vacuum regime stabilization in the operation of milking machines has been solved. A mathematical model of the process of functioning of the servo control system of a rotary plate vacuum pump was built; the numerical modeling of its workflow was carried out. This paper reports the results of experimental studies on the influence of the regime parameters of the rotary plate vacuum pump on the efficiency of its operation, as well as the results of experimental research on the servo control system for the rotary plate vacuum pump. The operational process of the rotary plate vacuum pump HB-1200 for a milking machine was investigated. The influence of mode parameters (rotor speed n and vacuum pressure P) on the performance of the vacuum pump, Qa, vacuum pressure fluctuation, ΔP, and the power consumption of the vacuum pump drive, Np, has been determined. The servo control system of the rotary plate vacuum pump was experimentally investigated based on the developed algorithms of its operation. In a generally accepted algorithm, vacuum fluctuation increases with increasing an airflow rate: at ΔQa=45 l/min – ΔP=2.3 kPa; at ΔQa=90 l/min – ΔP=4.6 kPa; at ΔQa=135 l/min – ΔP=6.4 kPa. Unlike the generally accepted one, the developed algorithm enables a stable vacuum mode with the largest vacuum fluctuation being ΔP=2.4 kPa. For the first time, the functional dependence of the influence of the regime parameters of the rotary plate vacuum pump with its automatic servo control system on the stability of the vacuum regime of a milk-vacuum system in the milking machine was established. The results can be applied when improving milking machines in terms of ensuring the stabilization process of the vacuum regime.

Comparison of the operation of milking machine control valves and a newly designed regulating device

Parameters setting of Frequency Converter PI regulation to ensure the vacuum of the milking process

Using a Computer Driven PID Regulator for Controlling the Vacuum Pump of a Mechanical Milking Machine

Design and Simulation of a High Pressure Proportional Pneumatic Pressure Reducing Valve

Development of a novel high pressure electronic pneumatic pressure reducing valve

Design and Characteristics Analysis of a High Precision Pneumatic Proportional Pressure Valve

Valve Dynamic and Thermal Cycle Model in Stepless Capacity Regulation for Reciprocating Compressor

Justifying parameters for the automatic servo control system of a rotary plate vacuum pump in the milking machine

Studies to determine the value of air consumption and power of the device for automatic removal of the milking machine

Modelling of an Actuator in the Vacuum Control System of an Autonomous Milking Machine

Influence of milking conditions and vacuum control on hydraulic milking performance

THE ESTIMATION OF THE STRUCTURAL ELEMENTS OF CONDUCTIVITY OF THE VACUUM SYSTEM OF A PORTABLE MILKING MACHINE

Simulation Tests of a Cow Milking Machine—Analysis of Design Parameters

Establishing an interconnection between the technical and technological parameters of milking equipment based on the movement of a milk-air mixture in a milking machine

Research on dynamic performance of independent metering valve-cylinder system based on double pressure compound control

The Study Design of a Double-Action Plate Vacuum Pump

Actuation Mechanism of Microvalves: A Review

Development of a vacuum pump with a double-circuit lubrication system for milking machines

High Precision Energy Saving Motion Control Of Hydraulic Cylinder Based On Integration Of Valves And Pump

Operation of the milking equipment