Abstract:Synthesis methods of composites. Copper‐based metal–organic frameworks is anticipated to find applications in the field of friction materials owing to its plentiful surface‐active groups and distinctive framework structure. In this study, copper‐based metal–organic frameworks was synthesized through ultrasound‐assisted method and incorporated alone into carbon fiber reinforced epoxy composites or together with SiO2 nanoparticles towards the goal of improving the composites' friction and wear properties. It is revealed that copper‐based metal–organic frameworks alone cannot improve the friction and wear of carbon fiber reinforced epoxy composites simultaneously. The combination of copper‐based metal–organic frameworks and SiO2 nanoparticles was more effective in enhancing both the mechanical and tribological properties of studied composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s. Additionally, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3 N/m. Through morphological and chemical analysis on the worn surfaces and transfer films, the functioning mechanism of copper‐based metal–organic frameworks in modifying the mechanical and tribological properties was discussed. It was discovered that a tribological synergy exists between short carbon fibers, copper‐based metal–organic frameworks, and SiO2 fillers, leading to a shift in the wear mechanism of the composite materials from abrasive wear to adhesive wear. Concurrently, a shear‐prone transfer film forms on the surface of the counter steel surfaces. Findings of the present study pave a new route of designing high performance epoxy based tribo‐composites by using metal–organic frameworks. Highlights Cu‐BDC nanosheets were synthesized using ultrasound‐assisted techniques and incorporated as tribological fillers in EP composites. The combined use of Cu‐BDC, SiO2, and SCF fillers synergistically enhances the mechanical and tribological properties of EP composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3N/m. During the sliding friction process of the composite materials, Cu‐BDC and SiO2 play a crucial role in reducing SCF pull‐out wear through their anchoring effect. The dynamic coordination bond structure of Cu‐BDC contributes to the formation of uniform and continuous transfer films on counter metal surfaces.

Enhanced mechanical and tribological properties of epoxy‐based coatings by in‐situ synthesized silicon dioxide nanoparticles

Silica Nanoparticle-Decorated Alumina Rough Platelets for Effective Reinforcement of Epoxy and Hierarchical Carbon Fiber/epoxy Composites

Simultaneously enhanced friction and wear resistances of epoxy nanocomposites modified by nickel phyllosilicate nanoflowers under wet sliding conditions

Enhancement of Si3N4@MoS2 core–shell structure on wear/corrosion resistance of epoxy resin/polyacrylate IPN composite coating

A Micro-Nano Structure Formed by SiC/Graphene Oxide Self-Assembly Improves the Wear Resistance and Corrosion Resistance of an Epoxy-Based Composite Coating

Tribological synergy of copper‐based metal–organic frameworks, carbon fibers and SiO2 in modifying the friction and wear properties of epoxy composites

TEOS-Modified SiC Superhydrophobic Nanostructures in Epoxy Resin Coatings for Corrosion Prevention

Improvement of the Tribological Properties and Corrosion Resistance of Epoxy–PTFE Composite Coating by Nanoparticle Modification

Improving Interfacial Compatibility by a Micro–nano Synergetic Structure for High‐performance Epoxy Composites

Self-lubrication waterborne epoxy composite coating with amphiphilic Janus nanoparticles

Enhanced mechanical and wear properties of Ni-W-SiC composite coatings by synergistic influence of micro-nano SiC mixture

Controllable in situ fabrication of self-lubricating nanocomposite coating for light alloys

Strengthening mechanism of in-situ synthesized Cu2S nanoparticles on tribological performance of polyamide-imide bonded solid lubricating coatings

Facile preparation of a robust superhydrophobic SiO2/epoxy composite coating with favorable corrosion and scale inhibition performance

Facile modification of sepiolite and its application in wear-resistant and superhydrophobic epoxy coatings by mimicking the structure of shark skin

Tribological performance of epoxy composites reinforced by 3D expanded graphite skeleton containing oil microcapsules

Robust, hydrophobic anti-corrosion coating prepared by PDMS modified epoxy composite with graphite nanoplatelets/nano-silica hybrid nanofillers

Hydroxylated hexagonal boron nitride nanoplatelets enhance the mechanical and tribological properties of epoxy-based composite coatings

High abrasion-resistant biobased composite coatings with improved hardness and corrosion resistance performance based on natural lacquer and SiC nanowires

Polyhedral oligomeric silsesquioxane grafted covalent organic frameworks for simultaneously improved tribological and corrosion resistance of epoxy coatings

Mechanical and tribological properties of silicon carbide /carbon fiber/epoxy resin based composites