Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Facile modification of sepiolite and its application in wear-resistant and superhydrophobic epoxy coatings by mimicking the structure of shark skin

Facile Fabrication of Superhydrophobic Nanocomposite Coatings Based on Water‐Based Emulsion Latex

Fabrication of an environment-friendly epoxy coating with flexible superhydrophobicity and anti-corrosion performance

Facile preparation of a robust superhydrophobic SiO2/epoxy composite coating with favorable corrosion and scale inhibition performance

Superhydrophobic Composite Coating with Excellent Mechanical Durability

Robust superhydrophobic silicone/epoxy functional coating with excellent chemical stability and self-cleaning ability

Superhydrophobic epoxy resin coating with composite nanostructures for metal protection

Design and Synthesis of Robust Superhydrophobic Coating Based on Epoxy Resin and Polydimethylsiloxane Interpenetrated Polymer Network

A robust, room-temperature curable and molecular-level superhydrophobic coating with excellent antibacterial and antifouling properties

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Double-Layer Superhydrophobic Coating: Enhanced Anti-Corrosion and Anti-Fouling Resistance through Star Cross-linking of FPI/POSS@POA/F-SiO 2

TEOS-Modified SiC Superhydrophobic Nanostructures in Epoxy Resin Coatings for Corrosion Prevention

A double-layer multifunctional superhydrophobic coating with excellent anti-corrosion performance based on fluorine-free chemicals

Scalable Fabrication of Superhydrophobic Coating with Rough Coral Reef‐Like Structures for Efficient Self‐Cleaning and Oil‐Water Separation: An Experimental and Molecular Dynamics Simulation Study

Concrete inspired superhydrophobic nanocomposite coating with high robustness

Bristle worm inspired ultra-durable superhydrophobic coating with repairable microstructures and anti-corrosion/scaling properties

Preparation of High Wear-Resisting Superamphiphobic Robust Film by Self-Assembled Monolayer Surface Reaction

Constructing a robust ZIF-7 based superhydrophobic coating with the excellent performance in self-cleaning, anti-icing, anti-biofouling and anti-corrosion

Fabrication of robust superhydrophobic organic-inorganic hybrid coating through a novel two-step phase separation method

Design and preparation of multiple silica particles and study on superhydrophobic modified epoxy resin

Superhydrophobic epoxy coating modified by fluorographene used for anti-corrosion and self-cleaning