Experimental Investigation of the Pressure Decay Characteristics of Oil Reservoirs after Fracturing Operations

Liu Yang,Fukun Shi,Xiaoming Sun,Shuo Wang,Qingping Jiang,Huanyu Lu

DOI: https://doi.org/10.1021/acsomega.0c02909

IF: 4.1

2020-10-09

ACS Omega

Abstract:Field experience shows that extending shut-in periods are conducive to increasing tight oil production after fracturing operations. Understanding the regularity of pressure decay is helpful to establish an appropriate shut-in time. However, the characteristics and influencing factors of pressure decay are unclear. This paper studies the porosity, permeability, mineral composition, and pore structure of samples in six different blocks. The pressure decay regularity is tested according to an independently designed indoor shut-in experimental device, and the oil distribution of experimental samples is monitored using nuclear magnetic resonance technology. The results show that the fracturing fluid enters the matrix pores under the action of percolation to slowly drive out the oil, causing the well pressure to decay over time. There are three types of pressure decay characteristics: concave type, fluctuation type, and quadratic type. Compared with conventional sandstone, the pressure decay rate of tight reservoirs is slower, and the pressure decay characteristics are more complicated. Clay mineral-rich reservoirs will swell when exposed to water. As a result, the strength of the framework will be weakened and collapsed. What's more, it will cause blockage of the throat, blocking the flow of oil and the decay of pressure. In addition, the rate of pressure decay is also related to the volume of fracturing fluid, initial borehole pressure, and formation closure stress. At a certain proppant thickness (fracture width), the larger the fracturing fluid volume, the larger the fracture surface area and the faster the pressure decay rate; Moreover, the greater the initial shut-in pressure, the greater the pressure difference and the faster the decay rate; the formation closure stress causes the core porosity and the permeability to decrease, resulting in a decrease in the decay rate. The experimental results are of great significance for establishing a proper shut-in time and enhancing the oil recovery of tight reservoirs.This article has not yet been cited by other publications.

chemistry, multidisciplinary

What problem does this paper attempt to address?

### Problems the paper attempts to solve

This paper aims to study the characteristics of pressure decay after reservoir fracturing operations. Specifically, the paper focuses on the following aspects:

1. **Pressure decay law**: Through experiments, study the porosity, permeability, mineral composition, and pore structure of samples from different blocks to understand the law of pressure decay.
2. **Influencing factors**: Explore the main influencing factors of pressure decay characteristics, including the physical properties of rocks, mineral components, initial volume, and initial bottom - hole pressure, etc.
3. **Optimization of shut - in time**: By understanding the law of pressure decay, provide a theoretical basis for determining the appropriate shut - in time, thereby improving the recovery rate of tight oil reservoirs.

### Research background

With the gradual depletion of energy, the development of oil and gas fields is gradually inclined towards unconventional exploitation. Unconventional energy usually has the characteristics of low porosity, low permeability, and low formation pressure, resulting in problems such as rapid production decline and low recovery rate during the production process. To solve these problems, domestic and foreign experts have proposed hydraulic fracturing technology, which forms a complex fracture network by injecting a large amount of fracturing fluid and increasing the pressure coefficient of the reservoir.

After the fracturing operation, the oil well is usually shut in for a period of time to promote the imbibition of the fracturing fluid in the reservoir and make the fracture network continue to expand. Extending the shut - in time will lead to special production performance, such as pressure decay, low flow - back efficiency, and high - salinity flow - back water. These production dynamics are mainly caused by the interaction between the fracturing fluid and the reservoir.

### Main findings

1. **Types of pressure decay**: The experimental results show that the pressure decay characteristics can be divided into three types: concave, fluctuating, and quadratic.
2. **Influencing factors**:
- **Rock physical properties**: Porosity and permeability are positively correlated with the pressure decay rate, especially the permeability has a greater impact on the pressure decay rate.
- **Mineral composition**: The formation of montmorillonite, illite, and illite - montmorillonite mixed layers has a significant impact on the pressure decay rate.
- **Initial volume**: The larger the initial volume of the injected fracturing fluid, the faster the pressure decay speed.
- **Initial bottom - hole pressure**: The higher the initial bottom - hole pressure, the greater the pressure difference, and the faster the pressure decay speed.
3. **Optimization of shut - in time**: The experimental results are of great significance for determining the appropriate shut - in time and improving the recovery rate of tight oil reservoirs.

### Formulas

- **Exponential function formula**:
\[
P = P_0+ae^{-\frac{t}{t_0}}
\]
where \(P\) is the total pressure dependent variable, \(P_0\) is the initial value of pressure decay, \(t\) is the time variable, and \(a\) and \(t_0\) are constants.

- **Pressure decay rate formula**:
\[
P'=-ae^{-\frac{t}{t_0}}
\]

### Conclusion

This study, through experiments and data analysis, reveals the law of pressure decay and its influencing factors after fracturing operations in tight oil reservoirs, providing theoretical support for optimizing shut - in time and improving recovery rate.