Abstract:Ultraviolet-visible absorption spectroscopy is widely used to monitor water quality, and rapid optical signal detection is a key technology in the process of spectrum measurement. In this paper, an ultrafast spectrophotometer system that can achieve spectrum data acquisition in a single flash of the xenon lamp (within 200 ns) is introduced, and a real-time denoising method for the spectrum is implemented on a field programmable gate array (FPGA) to work cooperatively with the nanosecond spectrum acquisition system, in order to guarantee the quality of the spectrum signals without losing running speed. The hardware of the data acquisition and processing system are constructed on a Xilinx Spartan 6 FPGA chip and its peripheral circuit, including an analog to digital converter and a complementary metal-oxide-semiconductor transistor (CMOS) sensor’s diver circuit. An oversampling method that is suitable for the CMOS sensor’s output is proposed, which works on the CMOS sensor’s dark current noise and readout noise. Another moving-average filter method is designed adaptively, which works on the low-frequency component to filter out the residual spectrum noise of the spectrum signal. The implementation of the filter on the FPGA has been optimized by using a pipelined structure and dual high-speed random-access memory (RAM). As a result, the CMOS linear image sensor successfully captured the spectrum of xenon flash light at the readout clock frequency of 500 kHz and the processing manipulation to the full UV-Vis spectrum data was accomplished at a sub-microsecond speed performance. After the digital filter and oversampling technology were implemented, the coefficient of variation of the measurements reduced from 9.57% to 1.74%, while the signal noise ratio (SNR) of the absorption spectrum increased nine times, compared to the raw data of the CMOS sensor’s output. The tests towards different analyte samples were conducted, and the system shows good performance on distinguishing different concentrations of different analyte solutions on both ultra-violet and visible spectrum bands. The present work showcases the potential of the CMOS sensor’s technique for the fast detection of contaminated water containing nitrate and organic compounds.

Rapid Detection of Cleanliness on Direct Bonded Copper Substrate by Using UV Hyperspectral Imaging

Use of Hyperspectral Imaging for the Quantification of Organic Contaminants on Copper Surfaces for Electronic Applications

Design of an Optical Instrument for Copper Ion Detection in Water Environment

Handheld Multispectral Fluorescence Imaging System to Detect and Disinfect Surface Contamination

Enhanced Clean-In-Place Monitoring Using Ultraviolet Induced Fluorescence and Neural Networks

Contamination detection by optical measurements in a real-life environment: A hospital case study

Self-cleaning paper-based microfluidic biosensor employing DNAzyme and semiconducting single-walled carbon nanotube for copper ion detection

Acquisition and analysis of hyperspectral data for surface contamination level of insulating materials

Non-Contact, Real-Time Laser-Induced Fluorescence Detection and Monitoring of Microbial Contaminants on Solid Surfaces Before, During and After Decontamination

Rapid Assessment of Tablet Film Coating Quality by Multispectral UV Imaging

Multispectral UV imaging for fast and non-destructive quality control of chemical and physical tablet attributes

A Design of Real-Time Data Acquisition and Processing System for Nanosecond Ultraviolet-Visible Absorption Spectrum Detection

Plasma Spectral Analysis of Laser Cleaning Process in Air

Electrophoretic chip based on special wettability surfaces for detection of heavy metals

A novel method of rapid detection for heavy metal copper ion via a specific copper chelator bathocuproinedisulfonic acid disodium salt

Inspection of Surface Defects in Copper Strip Using Multivariate Statistical Approach and SVM.

A Nanofluidic Sensor for Real-Time Detection of Ultratrace Contaminant Particles in IC Fabrication

Use of plasma process diagnostic sensors for the monitoring of in situ dry cleaning of plasma enhanced chemical vapor deposition chamber

On-line Inspection System of Surface Quality for Medical Film

Rapid detection of ultra-trace nanoparticles based on ACEK enrichment for semiconductor manufacturing quality control

Rapid On-Site Nondestructive Surface Corrosion Characterization of Sintered Nanocopper Paste in Power Electronics Packaging Using Hyperspectral Imaging