Abstract:In this study, epoxy resin containing hollow polymeric microspheres as an insulating material was synthesized and subjected to thermal and hydrothermal aging. Scanning electron microscopy (SEM) and three-dimensional computed tomography (3D CT) were used to examine the internal structures of the specimens as they aged. Thermogravimetric analysis (TGA) and Fourier transform infrared spectra (FT-IR) helped to elucidate the physical and chemical changes associated with aging. Tensile, flexural, dynamic mechanical analysis (DMA), and other mechanical tests were used to examine the mechanical properties of the syntactic foams (SFs) as they aged. Electrical tests such as the leakage current and breakdown strength were used to measure how effectively the SF materials maintained their insulating characteristics with aging. By comparing the aged and unaged specimens, the aging mechanism of the SF was elucidated. The findings demonstrated that the epoxy resin matrix composite foam packed with hollow polymeric microspheres had little effect on thermal aging and exhibited good hydrothermal aging resistance. The microstructures of the specimens subjected to thermal aging barely changed; however, hydrothermal aging resulted in dramatic changes. Notably, the comprehensive properties of the SF increased during thermal aging and hydrothermal aging, possibly due to an increase in secondary crosslinking density after a certain period of aging. The thermal and hydrothermal aging specimens had maximum tensile strengths of 14 and 13 MPa, respectively. The tensile strength dropped as aging time increased to 11.6 and 7 MPa, respectively. Furthermore, while the breakdown strengths of the hydrothermal samples continued to fall, the breakdown strengths of the thermal specimens initially increased and subsequently decreased, with a maximum value of 40.76 kV/mm. This was possibly related to the fact that the crosslinking reaction dominated the thermal aging process, whereas hydrothermal aging had numerous implications on the characteristics of the SF materials. This study showed that the SF filled with hollow polymeric microspheres had the potential for long-term durability in hot and humid environments, supporting its application as an insulation material in composite insulation cores.

STUDY ON HYGROTHERMAL AGEING OF PMI FOAM CORED SANDWICH COMPOSITE

Moisture absorption and mechanical degradation studies of PMI foam cored fiber / epoxy resin sandwich composites

Effects of Hygrothermal Aging and Cyclic Compressive Loading on the Mechanical and Electrical Properties of Conductive Composites

Research on the Aging Effects of Adhesive and Composites on the Degradation Mechanism of Composite Adhesive Joints in Thermal-Humidity-Cycles for Automobiles

Mode Ⅱ Interfacial Delamination of Foam Core Composite Sandwich Structures in Hygrothermal Environment

Effects of temperature and humidity on interfacial properties of composite sandwich structures

Hygrothermal Ageing of Polymeric Sandwich Structures Used in Structural Engineering

Study on the Hygrothermal Aging Behavior and Diffusion Mechanism of Ti/CF/PMR Polyimide Composite Laminates

Vertical compression performance of fiber-reinforced polymer (FRP) foam sandwich composites in hygrothermal environment

Effects of Hygrothermal and Salt Mist Ageing on the Properties of Epoxy Resins and Their Composites

Experimental study on fatigue failure and damage of sandwich structure with PMI foam core

Effects of Hydrothermal Aging of Carbon Fiber Reinforced Polycarbonate Composites on Mechanical Performance and Sand Erosion Resistance

Physicochemical, mechanical and electrical properties of epoxy-based syntactic foam under thermal and hydrothermal aging conditions

Effect of temperature and cyclic hygrothermal aging on the interlaminar shear strength of carbon fiber/bismaleimide (BMI) composite

An Experimental Investigation of the Mechanism of Hygrothermal Aging and Low-Velocity Impact Performance of Resin Matrix Composites

Characterization and modeling of the uniaxial thermo-mechanical compressive behavior of polymethacrylimide (PMI) foam at different temperatures

Effect of Hygrothermal Aging on Compression Behavior of CFRP Material with Different Layups

Compressive Mechanical Behavior and Corresponding Failure Mechanism of Polymethacrylimide Foam Induced by Thermo-Mechanical Coupling

Hygrothermal Behavior of Carbon Fiber Fabric Reinforced Vinylester Resin Composite Structures

Experimental Study on Flexural Properties of FRP Foam Sandwich Plates in Hot and Humid Environment

The effects of temperature and hygrothermal aging on the properties of CF/PA6 composite and its compression failure mechanisms