Abstract:Multi-degree of freedom robots are playing very important role in different applications of automation. They are providing much more accuracy in carrying out a typical procedure as compared to the manual work done by human. In recent years the design, fabrication and development of robotic arms have been active research areas in robotics all around the world. This project describe a mechanical system, design concept and prototype implementation of a 6 DOF robotic arm, which should perform industrial task such as pick and place of fragile objects operation. This robot arm being controlled by micro-controller has base, shoulder, elbow, wrist rotation and a functional gripper. Gripper has been built as end-effector and is capable of grasping diverse objects within own workspace of the arm possible. I made an effort to endeavour one of the best model possible out of the three concepts tried. The three concepts that I undertook were dependent on the type of mechanism used to provide the movement. The first concept was to provide the movement with the help of Pneumatics. The idea of pneumatics did provide a feasible movement but I had to overcome the barrier of the weight as the weight of either the storage of gas or the air compressor would have affected the usage evidently. Similarly, in the second concept, I dealt with the forces of Hydraulics. The forces exerted by hydraulics, not only restricted the movement, but also annexed a certain amount of delay in the time period in which the movement had to be done. In, the third concept, I tried to provide the necessary movement with the help of Servo Motors. The results achieved with servo motors in replacement of pneumatics and hydraulics were impeccable. The motors not only provided the movement with minimal lag but also did not impede the movement of the hand.

Synthesis of a Six-Bar Gripper Mechanism for Aerial Grasping

Structural–Parametric Synthesis of Single-Loop 6R and 7R Mechanisms Using Factorization of Motion Polynomials and Its Application in Grippers

D-Grasp: Physically Plausible Dynamic Grasp Synthesis for Hand-Object Interactions

A Robust Aerial Gripper for Passive Grasping and Impulsive Release using Scotch Yoke Mechanism

Design, Kinematics, and Prototyping of a Gripping Mechanism to Adapt Large Space

Dynamic Modeling and Controller Design of a Novel Aerial Grasping Robot

A Grasp Synthesis and Grasp Synergy Analysis for Anthropomorphic Hand

An Integrated Approach to Aerial Grasping: Combining a Bistable Gripper with Adaptive Control

Six Degree of Freedom Robotic Arm with Mimicking Mechanism

Type synthesis of single-loop deployable mechanisms based on improved atlas method for single-DOF grasping manipulators

A deployable articulated mechanism enabled in-flight morphing aerial gripper

Kinematic and Dynamic Analysis of a Novel 5-DOF Multi-fingered Deployable Robotic Gripper

Design and Analysis of a Novel 3-DOF Deployable Grasping Mechanism

A Modular Pneumatic Soft Gripper Design for Aerial Grasping and Landing

Motion Generation of Planar Six- and Eight-Bar Slider Mechanisms As Constrained Robotic Systems

Synergizing Morphological Computation and Generative Design: Automatic Synthesis of Tendon-Driven Grippers

Mechanical Design, Modelling and Control of a Novel Aerial Manipulator

One-DOF six-bar space gripper with multiple operation modes and force adaptability

A Family of Folding Single-Loop Metamorphic Mechanisms for Aerospace Manipulators: Synthesis, Network, and Analysis

Customizable Power Grasps From Uncrewed Aerial Vehicles via a Soft “Wrapping” Gripper

Modeling and Application of an SMA-Actuated Lightweight Human-Inspired Gripper for Aerial Manipulation