Abstract:This paper deals with two shortcomings of the smooth-joint contact model (SJCM) used in the particle flow code (PFC). The first shortcoming is the increase of the shear strength of the joint when the shear displacement of the joint exceeds a specific value that is related to the particle size. This problem is named as the interlocking problem, which is caused by the interlocking particles. It occurs due to a shortcoming of the updating procedure in the PFC software related to the contact conditions of the particles that lie around the intended joint plane during high shear displacements. This problem also increases the dilation angle and creates unwanted fractures around the intended joint plane. To solve this problem two new approaches are proposed in this paper: (1) joint plane checking (JPC) approach and (2) joint sides checking (JSC) approach. These approaches and the regular approach are used to model: (a) the direct shear test using the PFC2D and PFC3D, (b) the biaxial test on a sample having a persistent joint with a dip angle varying from 0° to 90° at an interval of 15° using the PFC2D and (c) the polyaxial test on two samples, one of them having a joint with a dip direction of 0° and the dip angle varying from 0° to 90° at an interval of 15°, and the other sample having a joint with a dip angle of 60° and the dip direction varying from 0° to 90° at an interval of 15° using the PFC3D. All numerical results show that the JPC and JSC approaches can solve the interlocking problem. Also, they proved to be more consistent with the theory compared to the regular approach. However, the JPC approach leads to a slightly softer joint. Therefore, the JSC approach is suggested for jointed rock modeling using the PFC. The other shortcoming of the SJCM dealt within this paper is its inability to capture the non-linear behavior of the joint closure varying with the joint normal stress. This problem is solved in this paper by proposing a new modified smooth-joint contact model (MSJCM). MSJCM uses a linear relation between the joint normal stiffness and the normal contact stress to model the non-linear relation between the joint normal deformation and the joint normal stress observed in the compression joint normal stiffness test. A good agreement obtained between the results from the experimental test and the numerical modeling of the compression joint normal test shows the accuracy of this new model.

Improvements for the smooth joint contact model of the particle flow code and its applications

J2-deformation-type Soil Model Coupled with State-Dependent Dilatancy and Fabric Evolution: Multiaxial Formulation and FEM Implementation

Modelling the shearing behaviour of joints using an improved shear box genesis approach in particle flow code (2D) and its validation

New Data Processing Protocols to Isolate Fracture Deformations to Measure Normal and Shear Joint Stiffness

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

Local-Coordinate Representation for Spatial Revolute Clearance Joints Based on a Vector-Form Particle-Element Method

Dynamics Analysis of Spatial Mechanisms with Dry Spherical Joints with Clearance Using Finite Particle Method

Physical and particle flow modeling of jointed rock block behavior under uniaxial loading

Multi-peak deformation behavior of jointed rock mass under uniaxial compression: Insight from particle flow modeling

Investigating the Influence of Joint Angles on Rock Mechanical Behavior of Rock Mass Using Two-Dimensional and Three-Dimensional Numerical Models

Research on Hierarchical Model of Rock Joints

Numerical Simulation on the Effect of Rock Joint Roughness on the Stress Field

Experimental and numerical study of asperity degradation in the direct shear test

Influence of joint geometry and roughness on the multiscale shear behaviour of fractured rock mass using particle flow code

A particle mechanics approach for the dynamic strength model of the jointed rock mass considering the joint orientation

Numerical Simulation Study on Shear Properties of Rock Joint Under CNS Boundary Conditions

Cracking behavior of rock containing non-persistent joints with various joints inclinations

SPH procedures for modeling multiple intersecting discontinuities in geomaterial

Study of the effect of contact force model on the dynamic response of mechanical systems with dry clearance joints: computational and experimental approaches

An Investigation on Local Shearing Mechanisms of Irregular Dentate Rock Joints Using the PFC

Study on Mechanical Model for Postpeak Shear Behavior of Rock Joints Based on Degradation Characteristics of the 3D Morphology