Abstract:The degradation rate of magnesium (Mg) alloys is a key parameter to develop Mg-based biomaterials and ensure in vivo-mechanical stability as well as to minimize hydrogen gas production, which otherwise can lead to adverse effects in clinical applications. However, in vitro and in vivo results of the same material often differ largely. In the present study, a dynamic test bench with several single bioreactor cells was constructed to measure the volume of hydrogen gas which evolves during magnesium degradation to indicate the degradation rate in vivo. Degradation medium comparable with human blood plasma was used to simulate body fluids. The media was pumped through the different bioreactor cells under a constant flow rate and 37 °C to simulate physiological conditions. A total of three different Mg groups were successively tested: Mg WE43, and two different WE43 plasma electrolytically oxidized (PEO) variants. The results were compared with other methods to detect magnesium degradation (pH, potentiodynamic polarization (PDP), cytocompatibility, SEM (scanning electron microscopy)). The non-ceramized specimens showed the highest degradation rates and vast standard deviations. In contrast, the two PEO samples demonstrated reduced degradation rates with diminished standard deviation. The pH values showed above-average constant levels between 7.4-7.7, likely due to the constant exchange of the fluids. SEM revealed severe cracks on the surface of WE43 after degradation, whereas the ceramized surfaces showed significantly decreased signs of corrosion. PDP results confirmed the improved corrosion resistance of both PEO samples. While WE43 showed slight toxicity in vitro, satisfactory cytocompatibility was achieved for the PEO test samples. In summary, the dynamic test bench constructed in this study enables reliable and simple measurement of Mg degradation to simulate the in vivo environment. Furthermore, PEO treatment of magnesium is a promising method to adjust magnesium degradation.

A Semi-Mechanistic Model for Predicting the Service Life of Composite Coatings on VW63Z Magnesium Alloy

Composite Coatings Prepared by Combined Plasma Electrolytic Oxidation and Chemical Conversion Routes on Magnesium-Lithium Alloy

Self-repairing Capability of Magnesium Alloy During the Plasma Electrolytic Oxidation Process

Study of the Matching Performance of a Microarc Oxidation Film/electrophoresis Composite Coating on Magnesium Alloys

Influence of Plasma Electrolytic Oxidation on Fatigue Behaviour of ZK60A-T5 Magnesium Alloy

Research Progress on the Wear and Corrosion Resistant Plasma Electrolytic Oxidation Composite Coatings on Magnesium and Its Alloys

Degradation Rate Control Issues of PEO-Coated Wrought Mg0.5Zn0.2Ca Alloy

Predicting the Degradation Behavior of Magnesium Alloys with a Diffusion-Based Theoretical Model and in Vitro Corrosion Testing

Robust Damage‐Sensing and Corrosion‐Warning Polymeric Coatings: a New Approach to Visually Monitor the Degradation Dynamics of Coated Mg‐Alloys

Corrosion resistance of PEO and primer coatings on magnesium alloy

Quantitative study of the effect of high-performance zinc alloy coating technology on the life of mechanical components

Corrosion behavior of the composite ceramic coating containing zirconium oxides on AM30 magnesium alloy by plasma electrolytic oxidation

Corrosion resistance and molecular dynamics behavior of the MAO/SAM composite coatings on magnesium alloy

An enhanced phenomenological model to predict surface-based localised corrosion of magnesium alloys for medical use

Growth behaviour of low-energy plasma electrolytic oxidation coatings on a magnesium alloy

In Vivo Simulation of Magnesium Degradability Using a New Fluid Dynamic Bench Testing Approach

Experimental Characterization and Numerical Modeling of the Corrosion Effect on the Mechanical Properties of the Biodegradable Magnesium Alloy WE43 for Orthopedic Applications

Inhibitor-containing composite coatings on the magnesium alloys for the Offshore structures equipment

Prediction of Mg Alloy Corrosion Based on Machine Learning Models

Effects of Micro-Arc Oxidation Coating on Corrosion Behavior of Mg-Y-Zn in Simulated Body Fluid

Formation Process of Composite Plasma Electrolytic Oxidation Coating Containing Zirconium Oxides on Am50 Magnesium Alloy