Abstract:This paper presents a novel passive shimming method for the effective correction of static magnetic field (B0) inhomogeneities in Magnetic Resonance Imaging (MRI) systems. Passive shimming is used to find an optimum configuration for the placement of iron pieces applied to improve the B0 uniformity in the predefined imaging region referred to as the diameter of spherical volume (DSV). However, most passive shimming methods neglect to recognize that the space under the patient bed is not in use for imaging. In this work, we present a new algorithm that attempts to avoid the unnecessary shimming of the space under the patient bed. During implementation, the B0 field is still measured over the DSV surface and then mapped onto the effective imaging volume surface; a dedicated sensitivity matrix is generated only for the imaging area above the patient bed. A linear programming optimization procedure is performed for the determination of thicknesses and locations the shim pieces. Our experimental results showed that by revising the shimming target area, the new method provides superior optimization solutions. Compared to a conventional approach, the new method requires smaller amount of iron to correct the B0 inhomogeneities in the imaging area which has the effect of improving thermal stability to the B0 field. It also reduces the complexity of the optimization problem. Our new shimming strategy helps to improve the magnetic field homogeneity within the realistic imaging space, and ultimately improve image quality.

The possible influence of third-order shim coils on gradient–magnet interactions: an inter-field and inter-site study

Unconventional Gradient Coil Designs in Magnetic Resonance Imaging.

Characterization and Reduction of X-Gradient Induced Eddy Currents in A Ndfeb Magnetic Resonance Imaging Magnet-3d Finite Element Method-Based Numerical Studies

Finite Element Analysis of Gradient Z-Coil Induced Eddy Currents in a Permanent MRI Magnet

A Volumetric Finite-Difference Method for the Design of Three-Dimensional, Arbitrary-Structured MRI Gradient Coil.

A Novel Passive Shimming Method for the Correction of Magnetic Fields above the Patient Bed in MRI.

A Finite Difference Method for the Design of Gradient Coils in MRI—An Initial Framework

Gradient and shim technologies for ultra high field MRI

Design Multiple-Layer Gradient Coils Using Least-Squares Finite Element Method

A simulation study on the design of gradient coils in MRI for the imaging area above the patient bed

Ibem Applied To The Design Of Gradient Coils For Superconducting Mri

Design of Superconducting Shim Coils for an Open Bipanar Mri System Using Ibem

Shim Coil Set for an Open Biplanar Mri System Using an Inverse Boundary Element Method

A Numerical Analysis on Gradient Coils in Nuclear Magnetic Resonance for Imaging

Z-Gradient Coil Design with Improved Anti-eddy Performance for MRI System with Opposed Permanent Magnets

A Novel Design Method of Passive Shimming for 0.7-T Biplanar Superconducting MRI Magnet

Gradient Coil Design and Realization for a Halbach-Based MRI System

Design of Gradient Coils on Super-Elliptical Cylindrical Surfaces

Power deposition in the He bath induced by the Z gradient coil in the 11.7T Iseult magnet: theory versus measurements

Gradient Coil Design with Enhanced Shielding Constraint for a Cryogen-Free Superconducting MRI System

Acoustic noise reduction in the NexGen 7 T scanner