Abstract:The hydrodynamics of solid-liquid mixing process in a stirred tank with four pitched-blade impellers, fractal 1 impellers, and fractal 2 impellers were investigated using computational fluid dynamics (CFD) simulation. An Eulerian-Eulerian approach, standard k-epsilon turbulence model, and multiple reference frames (MRF) technique were employed to simulate the solid-liquid two-phase flow, turbulent flow, and impeller rotation, respectively. The effects of impeller speed, impeller type, impeller spacing, impeller blade tilt angle, impeller blade shape, solid particle size and initial solid particle loading on the solid particle suspension quality were investigated. Results showed that the homogenous degree of solid-liquid system increased with the increase of impeller speed. The impeller spacing of T5/6 and T and impeller blade tilt angle of 60 degrees and 45 degrees were appropriate for the solid-liquid suspension process. Fractal shape impeller was more efficient than jagged shape impeller in solid-liquid mixing process. Larger particle diameter and higher initial solid particle loading resulted in less homogenous distribution of solid particles. It was found that fractal impeller could improve the solid particle suspension quality compared with four pitched-blade impeller under the same power consumption, increasingly so with the fractal iteration number of fractal impeller. Moreover, fractal impeller reduced the size of impeller trailing vortex and consumed less power consumption compared with four pitched-blade impeller at the same impeller speed, and the more the number of fractal iteration, the higher the impeller energy utilization rate of fractal impeller. (C) 2019 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved.

Effect of blade tilt angle on fluid flow characteristics in spray-blowing agitation composite process: a simulation

Effect of Agitation on the Fluidization Behavior of a Gas–solid Fluidized Bed with a Frame Impeller

Computational Fluid Dynamics Simulation of Hydrodynamics in an Uncovered Unbaffled Tank Agitated by Pitched Blade Turbines

Progress on agitated apparatus for polymer devolatilization and its CFD simulation

CFD-PBM Investigation on Droplet Size Distribution in a Liquid–Liquid Stirred Tank: Effect of Impeller Type

Experimental Study of Influence of the Impeller Spacing on Flow Behaviour of Double‐Impeller Stirred Tank

Fluid Property Effects on the Splashing in Teapot Effect

Effects of blade structures on the dissolution and gas-liquid mass transfer performance of cup-shaped blade mixers

Numerical Simulation of Power Consumption and Mixing Characteristics of Novel Large-Double-blade Impeller

Experimental and Numerical Study on Flow Resistance and Bubble Transport in a Helical Static Mixer

Comparative Study on the Power Consumption and Flow Field Characteristics of a Three-Blade Combined Agitator

Experimental and Numerical Studies of the Flow Field in a Stirred Tank Equipped with Multiple Side‐Entering Agitators

Investigation of effects of impeller geometry on the spatial distribution of turbulent field and micro-mixing performance in a stirred reactor equipped with multiple impellers

Numerical Simulation of Solid-Liquid Mixing Characteristics in a Stirred Tank with Fractal Impellers

Numerical Investigation on Mechanism of Swirling Flow of the Prefilming Air-Blast Fuel Injector

Numerical investigation on the role of a mixer on spray impingement and mixing in channel cross-stream airflow

Experimental and numerical investigations on the hydrodynamics of gas-solid fluidized bed with an inclined agitator

Numerical Simulation on Process of Heterogeneous Mass Transfer of Oxygen in Stirred Tank

The transition to aeration in two-phase mixing in stirred vessels

Influences of Air Swirl Intensity on the Atomization and Combustion Performances of Effervescent Atomized Spray

A detailed numerical investigation of two-phase flows inside a planar flow-blurring atomizer