Abstract:This paper illustrated the effects of pre-aging on the microstructure, texture evolution, and deformation behavior of Mg–9Gd–4Y–2Zn–0.5Zr alloy during hot compression. Dynamic recrystallization (DRX) behavior, texture evolution, stress-strain curve, and activation energy of the solid solution and pre-aged alloy were evaluated. The results showed that the second-phase particles of the pre-aged samples exhibit combination of two types particles structure, which is composed of coarse dynamic precipitation particles and fine nanoparticles. The combination of these two types particles showed the best grain refinement effect by accelerating the DRX process, as the coarse dynamic precipitation particles promoted DRX through the PSN mechanism and the fine granular phase pinned dislocations and inhibited grain growth. As a result, the pre-aged samples had a higher DRX grain volume fractions and smaller average grain sizes than the solid solution alloys. In addition, the pre-aged sample had higher deformation activation energy (Q = 294.8 kJ/mol) than solid solution sample (Q = 223 kJ/mol) because β-phase pin dislocations formed during deformation restrained the movement of grain boundaries. The pre-aged alloys also showed a more concentrated texture than the solid solution alloys, with the c-axis of the coarse grains distributed from the compression direction (CD) at 30° inclination to the normal direction (ND). The c-axis distribution of the coarse grains was more scattered in the solid solution alloys. A hot processing map was constructed for the pre-aged alloy and used for evaluation. The optimal deformation parameters for the pre-aged Mg–9Gd–4Y–2Zn–0.5Zr alloy were between 0.001 and 0.1 s −1 at 400 °C–480 °C. These significant observations not only provide theoretical guidance but also practical application for setting plastic forming deformation parameters in industrial production.

Effects of pre-compression modes on mechanical properties and fatigue behaviors of rolled ZK60 magnesium alloy

Reducing the cyclic tension-compression asymmetry and cyclic hardening of ZK61 magnesium alloy via the compression-extrusion process

Effect of Rolled Microstructure on Fatigue Properties of Magnesium Alloy AM60

Numerical and Experimental Investigation on Hot Backward Extrusion Process of Mg-Gd-Y-Zn-Zr Magnesium Alloy

Mechanical Behavior and Microstructure Evolution of Mg-Gd-Y-Zn-Zr Alloy during Multipass Hot Compression Deformation

Modeling the Effect of Pre-Straining on Mechanical Behavior of Magnesium Alloy Sheet

Investigation of the microstructure and properties of extrusion-shear deformed ZC61 magnesium alloy under high strain rate deformation

Improving Low-Cycle Fatigue Life of ZK61 Magnesium Alloy Via Basal Texture Weakening by the Compression-Extrusion Process

Effect of Multi-Path Asynchronous Rolling Process on Microstructure and Mechanical Properties of ZK60 Magnesium Alloy

Mechanical Behavior and Microstructure During Compression of Semi-Solid ZK60-RE Magnesium Alloy at High Solid Content

The Dynamic Recrystallization and Mechanical Property Responses During Hot Screw Rolling on Pre-Aged ZM61 Magnesium Alloys

Improving the tension-compression asymmetry of ZK61 magnesium alloy through texture optimization in combined extrusion

Influence of Microstructure on Tensile Properties and Fatigue Crack Growth in Extruded Magnesium Alloy AM60

Effects of Annealing Treatment on Mechanical and Damping Properties of ZK60 Magnesium Alloy Sheets

Combined-extrusion techniques for fabricating yield-symmetric ZK61 magnesium alloys rods focusing on texture influence on their mechanical responses

Mechanical anisotropy improvement in ultrafine-grained ZK61 magnesium alloy rods fabricated by cyclic extrusion and compression

High cycle fatigue behavior of as-extruded ZK60 magnesium alloy

Microstructure and texture evolution during compression-extrusion process for tension/compression symmetrical ZK61 magnesium alloy rod

Influence of Pre-Twinning on High Strain Rate Compressive Behavior of AZ31 Mg-alloys

Microstructure and mechanical properties of extrusion ZC61 alloys under different dynamic compression loading directions

Effect of pre-aging on microstructure, activation energy, texture evolution of Mg–9Gd–4Y–2Zn–0.5Zr alloy during compression deformation