Abstract:Pr0.5Sr0.5Cr0.1Fe1-xNixO3-δ (PSCFNx, x=0.1,0.2) catalysts are prepared and utilized as electrodes in symmetric solid oxide fuel cells (SOFCs) for hydrogen oxidation reaction (HOR) and oxygen reduction reaction (ORR). Although, the PSCFNx cathode retains its perovskite phase during operation in SOFCs, the anode is totally decomposed and decorated with exsolved metallic Ni-Fe alloy (denoted as re-PSCFN) in a reducing atmosphere. Electrochemical impedance spectroscopy (EIS) combined with distribution of relaxation times (DRT) analysis reveals that the rate-limiting step for the HOR at the anode is the hydrogen adsorption-dissociation process. While the charge transfer process is found to dominate the ORR at the cathode. As the doping of Ni is increased, the cathode polarization resistance for ORR decreases from 0.19 Ω·cm2 for PSCFN0.1 to 0.09 Ω·cm2 for PSCFN0.2 at 800 °C in air. A similar trend is observed for the anode polarization resistance for HOR, which exhibits a reduction from 2.46 Ω·cm2 of re-PSCFN0.1 to 1.28 Ω·cm2 of re-PSCFN0.2 at 800 °C in H2. When fueled with hydrogen, the single cell based on the PSCFN0.2/La0.8Sr0.2Ga0.8Mg0.2O3-δ (LSGM)(240μm)/re-PSCFN0.2 configuration delivers a maximum power density of 623 mW·cm-2 and slight performance degradation when operated for 220 h at 800 °C. Ni doping results in the charge redistribution of B-site ions. Increasing the doping level of Ni results in additional electron transfer channels and oxygen vacancies that adsorb more oxygen species, which facilitates the ORR performance. Furthermore, an increase in the number of Ni-Fe nanoparticles and creation of abundant interfaces in the anode promotes HOR. This work suggests that PSCFN0.2 has the potential to be an excellent electrode material for a symmetric SOFC.

New two-layer Ruddlesden—Popper cathode materials for protonic ceramics fuel cells

Building Ruddlesden-Popper and Single Perovskite Nanocomposites: A New Strategy to Develop High-Performance Cathode for Protonic Ceramic Fuel Cells.

A Durable Ruddlesden-Popper Cathode for Protonic Ceramic Fuel Cells.

Effect of Zn doping on Sr3Fe2O7-δ Ruddlesden-Popper oxides as active and robust cathodes for protonic ceramic fuel cells

Leveraging in-situ formation of Ni–Fe nanoparticles to promote the catalytic performance of Ruddlesden-Popper based electrode for symmetrical solid oxide fuel cells

Enhancing Oxygen Reduction Kinetics and Proton Transfer of La0.6Sr0.4Co0.2Fe0.8O3−δ Cathode through Pr2Ni0.5Co0.5O4−δ Impregnation for Protonic Ceramic Fuel Cells

High-entropy design of Ruddlesden-Popper structured LNO for enhanced performance in proton solid oxide fuel cells

Sr3Fe1.5Zn0.5O7-δ As Cathode for Protonic-Conducting Solid Oxide Fuel Cells with Enhanced Oxygen Reduction Reaction Activity

Altering B-site surroundings with low-valence Cu to regulate La1.2Sr0.8NiO4+δ electrocatalysis for protonic ceramic fuel cells

Multicomponent doping realized superior triple-conducting within cobalt-free Ruddlesden-Popper-type perovskite for Proton-conducting fuel cells cathode

Highly Efficient A- and B-Site-Doped Ruddlesden–Popper Perovskite Oxide Nd2–xSrxNi0.9Cu0.1O4+δ As a Cathode for PCFCs

Design of a perovskite oxide cathode for a protonic ceramic fuel cell

Self-Assembled Triple-Conductive LNCO Cathodes for Proton-Conducting Solid Oxide Fuel Cells

La-doped Ba0.5Sr0.5Co0.8Fe0.2O3- D As Cathode for Protonic-Conducting Solid Oxide Fuel Cells with Enhanced Structure Stability

Decreasing the Polarization Resistance of LaSrCoO4 Cathode by Fe Substitution for Ba(Zr0.1Ce0.7Y0.2)O3 Based Protonic Ceramic Fuel Cells

A New Bi-Directional Surface Modification Cathode Based on Conventional Cathode La0.6Sr0.4Co0.2Fe0.8O3-δ

Bifunctional electrocatalysts Pr0.5Sr0.5Cr0.1Fe1-xNixO3-δ (x=0.1,0.2) for HOR and ORR of a symmetric solid oxide fuel cell

Tailoring the Activity Via Cobalt Doping of a Two-Layer Ruddlesden-Popper Phase Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Alkaline-earth-free Quasi-Ternary La(Co, Ni, Fe)O3-delta Perovskite As Potential Cathode for Solid Oxide Fuel Cells

Highly durable Sr-doped LaMnO3-based cathode modified with Pr6O11 nano-catalyst for protonic ceramic fuel cells based on Y-doped BaZrO3 electrolyte

Fabrication and Study of LaNi0.6Fe0.4O3-δ and Sm0.5Sr0.5CoO3-δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells