Abstract:High numerical aperture (NA) metalenses with large focusing efficiency are crucial for various applications in modern optics and photonics, particularly in high resolution imaging, high directivity lasing process and so on. Recent progresses have been achieved in designing high NA metalenses which can surpass conventional ones but mainly in the visible and infrared regimes by using all-dielectric metasurfaces. Here, multilayer phase gradient metallic metasurfaces sandwiched by filling dielectrics are employed to design high NA and large efficiency metalenses in the low spectrums. Benefiting from its high transmission amplitude and the full phase control to the incident waves of the proposed gradient meta-atoms with a double split ring resonator, the designed ultra-thin and small footprint four-layer metalens (5λ × 5λ × 0.23λ, λ is wavelength) demonstrates a high NA in the order of 0.8 and the large focusing efficiency around 40% according to the full-wave simulations and experimental measurements. Furthermore, the influences of the dielectric thickness and the layer number of stacked meta-atoms on the presented high NA metalens are investigated. The results reveal that the NA of proposed metalens can be surprisingly further improved from 0.8 to 0.9 by increasing dielectric thickness and/or the focusing efficiency can be enhanced to above 50% by adding the layer number of the stacked meta-atoms. These findings also imply that our high NA metalens in low spectrum can be compatible to the standard printed circuit board fabrication and also posses of good robustness to the metasurface layer number. The presented work provides new vistas to develop high NA and large efficiency metalens in low microwave or Terahertz (THz) spectrum, where the metallic metasurfaces are commonly used. Besides, it can benefit to the development of various novel metadevices such as miniaturized high-gain lens antenna, compact cloaks and many others in modern microwave engineering and/or THz optics.

A Near‐Zero Index Metamaterial Lens for Reduced Complexity and High‐Performance Active Electronically Scanned Arrays

Fast and Efficient Inverse Design Framework for Multifunctional Metalenses

Metamaterial Lens Design for Electronically Steered Arrays

Broadband Achromatic Polarization Insensitive Metalens Design in the Near-Infrared Spectrum

High‐Efficiency Optical Sparse Aperture Metalens Based on GaN Nanobrick Array

A Metalens Design for On- and Off-Center Focusing with Amorphous Silicon Hydrogenated (a-Si:H)-Based 1D Array in Visible Spectrum

Monolithically integrated wide field-of-view metalens by angular dispersionless metasurface

High numerical aperture and large focusing efficiency metalens based on multilayer transmitarray elements

An efficiently-designed wideband single-metalens with high-efficiency and wide-angle focusing for passive millimeter-wave focal plane array imaging

A single-layer panoramic metalens with > 170° diffraction-limited field of view

Large Area Metalenses: Design, Characterization, and Mass Manufacturing

Optimization-free approach for broadband achromatic metalens of high-numerical-aperture with high-index dielectric metasurface

An ultra-thin high-efficiency plasmonic metalens with symmetric split ring transmitarray metasurfaces

Two Beam Steering Lenses Enabled by Metamaterials

Experimental realization of an ultra-thin and continuous scanning metasurface mimicking a Luneburg lens

A broadband achromatic metalens for focusing and imaging in the visible

A Zero Index Metamaterial Lens for Gain Enhancement of Patch Antenna and H-Plane Horn Antenna

Low-cost laser cutting fabricated all-metallic metamaterial near-field focusing lens

A detached zero index metamaterial lens for antenna gain enhancement

Single‐Layer Aberration‐Compensated Flat Lens for Robust Wide‐Angle Imaging

Broadband achromatic dielectric metalenses