Abstract:Electrochemical cells with aluminum (Al) as the active material offer the benefits of high energy density, low cost, and high safety. Although several research groups have assembled rechargeable Al//MxOy (M = Mn, V, etc) cells with 2 m aqueous Al trifluoromethanesulfonate as an electrolyte and demonstrated the importance of the artificial solid electrolyte interphase (ASEI) on the Al anode for realizing high rechargeable capacity, the reactions of the Al anode in such cells remain underexplored. Herein, we investigate the effects of the ASEI on the charge/discharge cycling stability and activity of Al cells with the abovementioned aqueous electrolyte and reveal that this interphase provides chloride anions to induce the corrosion of Al rather than to support the transportation of Al3+ ions during charge/discharge. Regardless of the ASEI presence/absence, the main reactions at the Al anode during charge/discharge cycling are identified as oxidation and gas evolution, which suggests that the reduction of Al in the employed electrolyte is irreversible. The simple introduction of chloride anions (e.g., 0.15 m NaCl) into the electrolyte is shown to allow the realization of an Al//MnO2 cell with superior performance (discharge working voltage ≈ 1.5 V and specific capacity = 250 mA h/g). Thus, the present work unveils the mechanisms of reactions occurring at the Al anode of aqueous electrolyte Al cells to support their further development.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c08782.Electrochemical performance of symmetric Al cells (and the related FTIR spectra), compatibility of various electrolytes to ILs, surface morphology of aluminum after various treatment conditions, influence of adding different acids and chloride salts to the electrolyte, electrochemical windows of different electrolytes, TEM analysis of the discharged α-MnO2 sample, CV curves of asymmetric batteries in different electrolytes, OCV curve of full cells, additional EIS data, and effect of cycling on electrolyte pH (PDF)Observation of gas evolution during charge/discharge cycling from Al symmetric cells (MP4)Observation of gas evolution during charge/discharge cycling from an Al//α-MnO2 cell using a 2 m Al(OTf)3 + 0.15 m NaCl aqueous electrolyte (MP4)This article has not yet been cited by other publications.

An acetamidine-based chloroaluminate polyamide gel electrolyte assists durable rechargeable aluminum/graphite cells

A reliable gel polymer electrolyte enables stable cycling of rechargeable aluminum batteries in a wide-temperature range

A facile in-situ polymerization of cross-linked Poly(ethyl acrylate)-Based gel polymer electrolytes for rechargeable aluminum batteries

Low-Cost Gel Polymer Electrolyte for High-Performance Aluminum-Ion Batteries

Solid Polymer Electrolytes with Enhanced Electrochemical Stability for High‐Capacity Aluminum Batteries

A deep eutectic electrolyte of AlCl 3 –acetamide for rechargeable aluminum-ion batteries

Crosslinked poly(acrylonitrile–glycidyl methacrylate) as a novel gel polymer electrolyte

Low-cost AlCl3/Et3NHCl Electrolyte for High-Performance Aluminum-Ion Battery

Aqueous Aluminum Cells: Mechanisms of Aluminum Anode Reactions and Role of the Artificial Solid Electrolyte Interphase

The critical role of in-situ lithium fluoride in gel polymer electrolyte for high-performance rechargeable batteries

Amidine-based ionic liquid analogues with AlCl3: a credible new electrolyte for rechargeable Al batteries

Comparative Study of Guanidine-, Acetamidine- and Urea-Based Chloroaluminate Electrolytes for an Aluminum Battery

Constructing Stable Solid Electrolyte Interphase Using Gel Polymer Electrolytes for Anode-Free Lithium Metal Batteries with Enhanced Cycle Life

Locally Concentrated Deep Eutectic Liquids Electrolytes for Low-Polarization Aluminum Metal Batteries

The intermolecular interaction enables ordered ion transport in quasi-solid-state electrolyte for ultra-long life lithium-metal battery

Cellulose-based Gel-Type Electrolyte Fabricated by Lyophilization to Enable Uniform Li+ Ion Flux Distribution for Stable Li Metal Anodes with High-Rate Capability

Optimized Electrode/Electrolyte Interface Engineering for Dendrite‐Free Al Anode and Self‐Activated Graphite Cathode

Tailoring Interface to Boost the High‐Performance Aqueous Al Ion Batteries

Nylon-Based Composite Gel Membrane Fabricated via Sequential Layer-By-Layer Electrospinning for Rechargeable Lithium Batteries with High Performance

High Performance Anode-Free Lithium Pouch Cells Employing Lithiophilic Gel Polymer Electrolyte with Ion Conductive Network

A gel polymer electrolyte with Al2O3 nanofibers skeleton for lithium—sulfur batteries