Abstract:The combination of solid waste into lightweight aggregates is a promising strategy for solid waste resource utilization and an effective method for carbon reduction. Herein, the lightweight aggregate with high CO 2 adsorption and mineralization performance was prepared by multi-source solid waste combined with porous structural material. Based on the basic property parameters (density, water absorption and porosity) of lightweight aggregates, the effectiveness of multi-source solid waste (fly ash (FA), desulfurization gypsum (DG), coal gangue (CG), blast furnace slag (BFS) and steel slag (SS)) to improve the aggregate performance was determined. The water absorption rate reduced by 20 % and the mechanical strength increased by 49.1 % with the addition of five multi-source solid waste. Moreover, the amount of CO 2 absorption could be steadily maintained above 20 % throughout the carbonization curing at room temperature. The decrease in bulk density and water absorption, as well as the increase in skeleton density and mechanical strength of aggregates, were the results of the synergistic effect of multi-source solid waste. This could be attributed to the correlation between the physical properties of the aggregate. The pathway of increasing carbon absorption was proposed based on product analysis and pore characterization. The inability of CO 2 to diffuse into aggregate was referred to the accumulation of carbonate on the aggregate surface, resulting in a low carbon absorption rate. The porosity of aggregates was increased and the carbon absorption rate was improved by adding porous materials (diatomite and zeolite). The CO 2 absorption of multi-source solid waste coupled with porous materials was increased to 26.3 % under 20 % CO 2 (v/v) in nitrogen. Additionally, the synergistic effects of solid waste inhibited the content of heavy metals, and porous materials showed notable inhibiting effect on 8 heavy metals. Zn decreased by 28.7 % due to the addition of DE, and ZE had a better reduction effect by 42.9 %. This study provides a significant understanding of the porous materials modified cold-bonded aggregates by the utilization of multi-source industrial solid waste coupled with CO 2 for building materials in engineering applications.

Performance investigation and optimization of the granulation-CO2 concentration for the production of high-strength BOFS aggregates

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Microstructure Refinement of Calcium-Sulfate-aluminate and Portland Cement (CSA-PC) Hybrids with Accelerated CO2 Curing (ACC)

Accelerated carbonation of steel slag for enhanced carbon capture and utilization as aggregate in alkali-activated materials

Blended Basic Oxygen Furnace (BOF) Slag with Ground Granulated Blast Furnace Slag (GGBFS) as a Pozzolanic Material

Interdependent factors contributing towards carbonation of steel slag compact: consideration of casting pressure, water dosage and carbonation duration

Accelerated carbonation and stabilization of BOF slag: data fitting relationship between particle size and CO2 sequestration

Improving the early reactivity of activated basic oxygen furnace slag – The influence of particle fineness and grinding aids

Co-grinding treatment for developing integrated-properties SCMs from basic oxygen furnace slag and furnace bottom ash: A step toward synthesis advanced SCMs

Mechanical Activation of Medium Basicity Steel Slag under Dry Condition for Carbonation Curing

Effect of Carbonation Treatment on the Strength and CO2 Uptake Rate of Composite Cementitious Material with a High Steel Slag Powder Content

Influence of Mass Concentration on Microstructure and Pore Structure of Coal-Gangue-Based Green Cemented Filling Body

Stabilization of iron ore tailing with low-carbon lime/carbide slag-activated ground granulated blast-furnace slag and coal fly ash

Experimental and Statistical Study on the Properties of Basic Oxygen Furnace Slag and Ground Granulated Blast Furnace Slag Based Alkali-Activated Mortar

Modification of multi-source industrial solid waste with porous materials to produce highly polymerizeosilica gel: Microstructure optimization and CO 2 mineralization enhancement mechanism

Performance Assessment of Carbon Dioxide Sequestration in Cement Composites with a Granulation Technique

Microstructure and mechanical performance of alkali-activated tuff-based binders

Multiple model approach to evaluation of accelerated carbonation for steelmaking slag in a slurry reactor

Preparation and Characterization of Low-Carbon Cementitious Materials Based on Soda-Residue-Activated Ground Granulated Blast-Furnace Slag: A Case Study on Cemented Paste Backfills

Atomic-Scale Insights into the Effects of the Foaming Degree on the Glass–Ceramic Matrix Derived from Waste Glass and Incineration Bottom Ash

Enhanced aerobic sludge granulation by applying carbon fibers as nucleating skeletons