Abstract:Cryofixation by ultra-rapid freezing is widely regarded as the gold standard for preserving cell structure without artefacts for electron microscopy. However, conventional cryofixation technologies are not compatible with live imaging, making it difficult to capture dynamic cellular processes at a precise time. To overcome this limitation, we recently introduced a new technology, called microfluidic cryofixation. The principle is based on micro-hotplates counter-cooled with liquid nitrogen. While the power is on, the sample inside a foil-embedded microchannel on top of the micro-hotplate is kept warm. When the heater is turned off, the thermal energy is drained rapidly and the sample freezes. While this principle has been demonstrated experimentally with small samples (<0.5 mm2), there is an important trade-off between the attainable cooling rate, sample size, and heater power. Here, we elucidate these connections by theoretical modeling and by measurements. Our findings show that cooling rates of 106 K s−1, which are required for the vitrification of pure water, can theoretically be attained in samples up to ∼1 mm wide and 5m thick by using diamond substrates. If a heat sink made of silicon or copper is used, the maximum thickness for the same cooling rate is reduced to ∼3 μm. Importantly, cooling rates of 104 K s−1 to 105 K s−1 can theoretically be attained for samples of arbitrary area. Such rates are sufficient for many real biological samples due to the natural cryoprotective effect of the cytosol. Thus, we expect that the vitrification of millimeter-scale specimens with thicknesses in the 10m range should be possible using micro-hotplate-based microfluidic cryofixation technology.

Rapid melting and revitrification as an approach to microsecond time-resolved cryo-electron microscopy

In Situ Melting and Revitrification as an Approach to Microsecond Time-Resolved Cryo-Electron Microscopy

Shaped Laser Pulses for Microsecond Time-Resolved Cryo-EM: Outrunning Crystallization during Flash Melting

Microsecond Time-Resolved Cryo-Electron Microscopy

Implementation of a flash-photolysis system for time-resolved cryo-electron microscopy

Laser Flash Melting Cryo-EM Samples to Overcome Preferred Orientation

Time-resolved cryo-EM using a combination of droplet microfluidics with on-demand jetting

Direct Measurement of the Critical Cooling Rate for the Vitrification of Water

Time resolution in cryo-EM using a PDMS-based microfluidic chip assembly and its application to the study of HflX-mediated ribosome recycling

Megahertz cycling of ultrafast structural dynamics enabled by nanosecond thermal dissipation

Reversal of crystallization in cryoprotected samples by laser editing

Time Resolved Cryo‐Correlative Light and Electron Microscopy

Model-Based Optimization of Solid-Supported Micro-Hotplates for Microfluidic Cryofixation

Precision super-resolution cryo-correlative light and electron microscopy for rapid in situ structural analyses of optogenetically-positioned organelles

Visualizing a protein quake with time-resolved X-ray scattering at a free-electron laser

Towards sub-millisecond cryo-EM grid preparation

Femtosecond mega-electron-volt electron microdiffraction

New controlled environment vitrification system for cryo-transmission electron microscopy: design and application to surfactant solutions

Flash Melting Amorphous Ice

Development of an ultrafast pulsed ponderomotive phase plate for cryo-electron tomography