Abstract:This study aims to provide a thorough evaluation for the changes in the microstructure and evolution of strength of highly reactive clays that were treated with 7% lime over a period of curing time as a function of the mixing moisture content. Three series of testing were carried out on specimens with 100%, 85% and 75% of bentonite content and prepared with different moisture content of 10, 20, 30 and 40% above the corresponding optimum moisture content. Specimens of 100% bentonite were treated with 7% of lime, compacted to achieve a predetermined dry unit weight and cured at temperatures of 20 °C and 40 °C for up to 28 days whereas the specimens with 85% and 75% of bentonite content were prepared by the addition of sand and were cured at 20 °C for up to 7 days. Unconfined Compressive Strength tests and Scanning Electron Microscopy were conducted to observe the strength and the microstructural changes resulting from increasing mixing moisture content. California Bearing Ratio and Resilient Modulus were correspondingly determined based on correlations with the Unconfined Compressive Strength. The failure pattern was also studied to better understand the ultimate behaviour of lime stabilised clays. The results revealed that the strength of treated bentonite increased with the increase in the moisture content up to 30% above the corresponding optimum moisture content and with increasing the curing time and temperature. Nevertheless, substituting bentonite with sand on the specimen resulted in a significant reduction on the attained strength. Furthermore, the results of California Bearing Ratio and Resilient Modulus showed that values for both parameters are significantly enhanced with lime treatment. The microstructural analysis provided visual evidence to the improved strength in which the pozzolanic reaction was found to be significantly affected by the amount of moisture in the mixture. The results suggested that compacting lime treated expansive clays with moisture content moderately higher than the optimum moisture content would result in a significant enhancement to the attained strength over the period of curing.

Thermogravimetric analysis and compressive strength of cement mixes using Thai Lopburi calcined clay as supplementary cementitious material

Exploration of the Compressive Strength and Microscopic Properties of Portland Cement Taking Attapulgite and Montmorillonite Clay as an Additive

Thermogravimetric analysis and phase characterizations of Portland fly ash limestone cements

Limestone Calcined Clay as Potential Supplementary Cementitious Material—An Experimental Study

The Synergistic Effect of Calcained Coal-Series Kaolinite and Limestone on the Hydration of Portland Cement

Effect and mechanism of nano-Ca 10 (PO 4 ) 6 (OH) 2 additive on compressive strength of calcium aluminate cement at high temperature

Effect of High Content Limestone Powder on Microstructure and Mechanical Properties of Cement-based Materials

Performance of Limestone Calcined Clay Cement (LC3) with various kaolinite contents with respect to chloride transport

The Impact of Moisture and Clay Content on the Unconfined Compressive Strength of Lime Treated Highly Reactive Clays

Calcined nanosized tubular halloysite for the preparation of limestone calcined clay cement (LC 3 )

Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing

3D printing of calcined clay-limestone-based cementitious materials

Influences of metakaolin and calcined clay blended cement on chloride resistance and electrical resistivity of concrete

The role of low-quality calcined clay in enhancing the performance of cement mortar exposed to normal and aggressive media

Effect of High Calcium Fly Ash, Ladle Furnace Slag, and Limestone Filler on Packing Density, Consistency, and Strength of Cement Pastes

Effect of Thermoactivated Recycled Cement, Hardened Cement Powder and Hydrated Lime on the Compressive Strength of Mortars

Properties of Concrete Containing Large Volumes of Ground Granulated Blast Furnace Slag and Ground Coal Bottom Ash with Lime Kiln Dust

Revisiting the Effect of Slag in Reducing Heat of Hydration in Concrete in Comparison to Other Supplementary Cementitious Materials

Effects of Using Cold Bonded Coarse and Fine Calcined Attapulgite Lightweight Aggregates on the Performance Properties of Microsilica and Fly Ash Blended Concretes

Compressive strength and environmental impact of sustainable blended cement with high-dosage Limestone and Calcined Clay (LC2)

Thermal analysis and microstructure of Portland cement-fly ash-silica fume pastes