Fe–Zn alloy, a new biodegradable material capable of reducing ROS and inhibiting oxidative stress

Shuaikang Yang,Weiqiang Wang,Yanan Xu,Yonghui Yuan,Shengzhi Hao

DOI: https://doi.org/10.1093/rb/rbae002

2024-01-01

Regenerative Biomaterials

Abstract:Abstract Fe-based biodegradable materials have attracted significant attention due to their exceptional mechanical properties and favorable biocompatibility. Currently, research on Fe-based materials mainly focuses on regulating the degradation rate. However, excessive release of Fe ions during material degradation will induce the generation of reactive oxygen species (ROS), leading to oxidative stress and ferroptosis. Therefore, the control of ROS release and the improvement of biocompatibility for Fe-based materials are very important. In this study, new Fe–Zn alloys were prepared by electrodeposition with the intention of using Zn as an antioxidant to reduce oxidative damage during alloy degradation. Initially, the impact of three potential degradation ions (Fe2+, Fe3+, Zn2+) from the Fe–Zn alloy on human endothelial cell (EC) activity and migration ability was investigated. Subsequently, cell adhesion, cell activity, ROS production and DNA damage were assessed at various locations surrounding the alloy. Finally, the influence of different concentrations of Zn2+ in the medium on cell viability and ROS production was evaluated. High levels of ROS exhibited evident toxic effects on ECs and promoted DNA damage. As an antioxidant, Zn2+ effectively reduced ROS production around Fe and improved the cell viability on its surface at a concentration of 0.04 mmol/l. These findings demonstrate that Fe–Zn alloy can attenuate the ROS generated from Fe degradation thereby enhancing cytocompatibility.

materials science, biomaterials

What problem does this paper attempt to address?

The main issue this paper attempts to address is the generation of reactive oxygen species (ROS) and oxidative stress caused by the excessive release of iron ions during the degradation of iron-based biodegradable materials. Specifically, the authors investigated whether a new Fe–Zn alloy could reduce oxidative damage and improve cell compatibility through the antioxidant effect of zinc.

### Main Research Content:
1. **Background Introduction**:
- Iron-based biodegradable materials have attracted widespread attention due to their excellent mechanical properties and good biocompatibility.
- However, iron-based materials release excessive iron ions during degradation, leading to the generation of ROS, which in turn causes oxidative stress and ferroptosis.
- Therefore, it is crucial to control the release of ROS and improve the biocompatibility of iron-based materials.

2. **Research Objectives**:
- To prepare a new Fe–Zn alloy by electrodeposition, using zinc as an antioxidant to reduce oxidative damage during alloy degradation.
- To study the effects of Fe2+, Fe3+, and Zn2+ on the activity and migration ability of human endothelial cells (ECs).
- To evaluate cell adhesion, cell activity, ROS generation, and DNA damage around alloys at different locations.
- To assess the impact of different concentrations of Zn2+ on cell viability and ROS generation.

3. **Experimental Methods**:
- **Material Preparation**: Fe–Zn alloys were prepared by pulse electrodeposition and annealed.
- **Cell Experiments**: Human umbilical vein endothelial cells (HUVECs) were used for cytotoxicity, migration, adhesion, and proliferation experiments.
- **ROS Detection**: The DCFH-DA probe was used to detect intracellular ROS generation.
- **Cell Viability and DNA Damage Detection**: Fluorescent staining was used to detect the ratio of live to dead cells and DNA damage.

4. **Main Results**:
- Fe2+ and Fe3+ have higher tolerance in endothelial cells, with IC50 values of 0.5 and 2 mmol/L, respectively, while Zn2+ has the lowest tolerance, with an IC50 value of 0.1 mmol/L.
- Fe2+ participates in the Fenton reaction, generating excessive ROS free radicals and reducing cell activity; Fe3+ enhances cell activity and promotes cell migration at low concentrations.
- The ROS generated during the degradation of the Fe–Zn alloy is lower than that of pure iron, and high concentrations of ROS are toxic to endothelial cells and promote DNA damage.
- Zn2+, as an antioxidant, effectively reduced ROS generation around Fe at a concentration of 0.04 mmol/L, improving cell viability on the cell surface.

### Conclusion:
This study proposes a new Fe–Zn alloy that reduces ROS generation during the degradation of iron-based materials through the antioxidant effect of zinc, thereby alleviating oxidative stress and improving cell compatibility. This provides a new approach to addressing the oxidative stress issues caused by iron-based implant materials and demonstrates the potential of Fe–Zn alloys as biodegradable implant materials.