Abstract:Highlights • (1) The plastic flow behavior of embedded linear friction welding process was revealed by numerical simulation combined with thermo-physical simulation. • (2) On the direction perpendicular to oscillation, thermo-plastic metals are mainly flowing downwardly along welding interface, resulting in inverted "V" shaped interfacial plastic zone and un-welded defects at upper of joint. • (3) High oscillating frequency combined with low pressure and small amplitude are appropriate to improve the upward interfacial plastic flow and suppress the un-welded defects. In this study, a new linear friction welding (LFW) process, embedded LFW process, was put forward, which was mainly applied to combination manufacturing of long or overlong load-carrying titanium alloy structural components in aircraft. The interfacial plastic flow behavior and bonding mechanism of this process were investigated by a developed coupling Eulerian-Lagrangian numerical model using software ABAQUS and a novel thermo-physical simulation method with designed embedded hot compression specimen. In addition, the formation mechanism and control method of welding defects caused by uneven plastic flow were discussed. The results reveal that the plastic flow along oscillating direction of this process is even and sufficient. In the direction perpendicular to oscillation, thermo-plastic metals mainly flow downward along welding interface under coupling of shear stress and interfacial pressure, resulting in the interfacial plastic zone shown as an inverted "V" shape. The upward plastic flow in this direction is relatively weak, and only a small amount of flash is extruded from top of joint. Moreover, the wedge block and welding components at top of joint are always in un-steady friction stage, leading to non-uniform temperature field distribution and un-welded defects. According to the results of numerical simulation, high oscillating frequency combined with low pressure and small amplitude is considered as appropriate parameter selection scheme to improve the upward interfacial plastic flow at top of joint and suppress the un-welded defects. The results of thermo-physical simulation illustrate that continuous dynamic recrystallization (CDRX) induces the bonding of interface, accompanying by intense dislocation movement and creation of many low-angle grain boundaries. In the interfacial bonding area, grain orientation is random with relatively low texture density (5.0 mud) owing to CDRX.

Behavior and Mechanism of Void Welding Under Thermal Mechanical Coupling

Thermal-fluid-structure coupling analysis of void defect in friction stir welding

Effect of Welding Defects on Mechanical Properties of Welded Joints Subjected to Temperature

Void nucleation and growth behavior of TIG welded AA2219 deformed at cryogenic temperatures

The effect of void defect on the evolution mechanisms of dislocations and mechanical properties in nickel-based superalloys by molecular dynamics simulation of real γ/γ′ structures

Enhancing heat and mass transfer to suppress void defects in friction stir welding by superimposing ultrasonic vibration

Numerical simulation of weld formation in friction stir welding based on non-uniform tool-workpiece interaction: An effect of tool pin size

The Influence of Casting Microvoids on the Constitutive Behavior of As-Quenched Al-Cu-Mn Alloy

Numerical Investigation on Molten Pool Dynamics and Defect Formation in Electron Beam Welding of Aluminum Alloy

Experimental investigations on the kinetics of void shrinkage in solid state bonding of AA6061 at high temperatures and high pressures

Numerical and experimental study on the thermal process, material flow and welding defects during high-speed friction stir welding

Revealing the mechanism of tool tilting on suppressing the formation of void defects in friction stir welding

Unraveling the transformation of ductile damage mechanisms of void evolution and strain localization based on deformation heterogeneity

Molecular dynamics simulations of tensile response for FeNiCrCoCu high-entropy alloy with voids

Interfacial voids and microstructure evolution, bonding behavior and deformation mechanism of TC4 diffusion bonded joints

Plastic flow and interfacial bonding behaviors of embedded linear friction welding process: Numerical simulation combined with thermo-physical experiment

Experimental Investigation into Plastic Damage of Microvoids with Interaction

Thermal Effect of Welding on Mechanical Behavior of High-Strength Steel

Micro-mechanics investigation of heterogeneous deformation fields and crack initiation driven by the local stored energy density in austenitic stainless steel welded joints

Interfacial Defects Evolution of Al 6061 / SS304 Electromagnetic Pulse Welding Joints during Post Welding Isothermal Treatment

Microstructure and deformation mechanism of dissimilar titanium alloy Ti600/Ti22Al25Nb weld joints strengthened by isothermal forging