Abstract:Author(s): Alvarado, Judith Elizabeth | Advisor(s): Meng, Ying Shirley | Abstract: The current commercial lithium ion battery utilizes “host-guest” electrodes that allow for the intercalation of lithium between the crystal lattice of the anode and cathode materials. The lithium ions are transported through the electrolyte medium during the charge/discharge process, Given their success, lithium ion batteries have now penetrated the electric vehicle market and large scale grid storage, which require batteries with much higher energy densities. To meet this demand, alternative anode and cathode chemistries are required. Consequently, this will put high strain on the electrolyte which will decompose at both low and high potentials to form a passivation layer known as the solid electrolyte interphase (SEI). Herein, the fundamental reduction mechanism of fluoroethylene carbonate (FEC) is investigated as an additive for conventional electrolytes to improve the SEI formation on various silicon anodes using a series of advanced spectroscopic and microscopic techniques. For the first time, the direct visualization of the SEI generated on the silicon nanoparticle is investigated by scanning electron microscopy and its chemical composition by electron energy loss spectroscopy. The SEI is further investigated on lithium metal anode. Highly concentrated bisalt ether electrolytes form a SEI that is dominated by salt decomposition rather than solvent decomposition, which enables high lithium metal cycling efficiencies. At high potentials the electrolyte oxidizes on the cathode to form the cathode electrolyte interphase (CEI). With the discovery of 5V cathode materials, a new electrolyte is required. Therefore, sulfone based electrolytes are studied as potential high voltage electrolyte. Combined with lithium bis(fluorosulfonyl) imide, this solvent-salt synergy addresses the traditional performance issues that develop at the interface of high voltage cathodes. The factors that affect the cycling performance of cathode materials for lithium ion batteries are also seen in sodium ion batteries. Atomic layer deposition (ALD) is widely used to improve the cycling performance, coulombic efficiency of batteries, and to maintain electrode integrity for LIBs. Therefore, this approach is used to understand the effect of Al2O3 ALD coating on P2-Na2/3Ni1/3Mn2/3O2 cathodes, which lowers the cathode impedance and improves particle morphology after cycling. Improving the electrode-electrolyte interface is critical to the development of next generation high density energy storage systems.

Optimizing the Electrolyte Systems for Na 3 (VO 1− x PO 4 ) 2 F 1+2 x (0≤ x ≤1) Cathode and Understanding their Interfacial Chemistries Towards High‐Rate Sodium‐Ion Batteries

Front Cover: Optimizing the Electrolyte Systems for Na 3 (VO 1‐ x PO 4 ) 2 F 1+2 x (0≤ x ≤1) Cathode and Understanding their Interfacial Chemistries Towards High‐Rate Sodium‐Ion Batteries (ChemSusChem 8/2022)

Constructing Stable Anion‐Tuned Electrode/Electrolyte Interphase on High‐Voltage Na3V2(PO4)2F3 Cathode for Thermally‐Modulated Fast‐Charging Batteries

Revealing the Dynamic Evolution of Electrolyte Configuration on the Cathode-Electrolyte Interface by Visualizing (De)Solvation Processes

Manipulating the Phase Compositions of Na 3 (VO 1– x PO 4 ) 2 F 1+2 x (0 ≤ x ≤ 1) and Their Synergistic Effects with Reduced Graphene Oxide toward High-Rate Sodium-Ion Batteries

Electrolyte Engineering with Tamed Electrode Interphases for High-Voltage Sodium-Ion Batteries

Electrolyte Design with Dual -C≡N Groups Containing Additives to Enable High-Voltage Na3V2(PO4)2F3-Bas Ed Sodium-Ion Batteries

(Invited) Solvation and Double Layer Structures in Nonaqueous Electrolytes for Facile Electrochemical Kinetics

Solvent versus Anion Chemistry: Unveiling the Structure-Dependent Reactivity in Tailoring Electrochemical Interphases for Lithium-Metal Batteries

A Supramolecular Electrolyte for Lithium‐Metal Batteries

A Supramolecular Electrolyte for Lithium-Metal Batteries

High performance cathode material based on Na3V2(PO4)2F3 and Na3V2(PO4)3 for sodium-ion batteries

Emerging Era of Electrolyte Solvation Structure and Interfacial Model in Batteries

Electrolyte Design with Dual -C≡N Groups Containing Additives to Enable High-Voltage Na 3 V 2 (PO 4 ) 2 F 3 -Based Sodium-Ion Batteries

Composite Electrolytes and Interface Designs for Progressive Solid‐state Sodium Batteries

Investigating and Optimizing Interfacial Properties of Electrode Materials for Lithium-ion and Sodium-ion Batteries

(Invited) Synchrotron X-Ray Spectroscopy and Imaging for Studying Intercalation Battery Chemistries

Exploring solvation structure and transport behavior for rational design of advanced electrolytes for next generation of lithium batteries

Toward High Performance Anodes for Sodium-Ion Batteries: From Hard Carbons to Anode-Free Systems

A Novel NASICON‐Typed Na 4 VMn 0.5 Fe 0.5 (PO 4 ) 3 Cathode for High‐Performance Na‐Ion Batteries

Recent progress and strategic perspectives of high-voltage Na3V2(PO4)2F3 cathode: Fundamentals, modifications, and applications in sodium-ion batteries