Abstract:Using single metal salts of zirconium, lanthanum, and iron as raw materials and sodium alginate as a cross-linking agent, a new composite adsorbent was prepared via the co-precipitation method and embedding immobilization technology, and its phosphorus adsorption performance in wastewater was evaluated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used for characterization, and a 0.5 mol·L−1 sodium hydroxide solution was used to regenerate the adsorbent. The experimental results demonstrated that the adsorption rate reached 99.88% when the wastewater volume was 50 mL, the initial concentration of phosphorus-containing wastewater was 5 mg·L−1, the pH was 5, the dosage of composite adsorbent was 0.2 g, and the adsorption time was 200 min. The prepared adsorbent could reduce the initial phosphorus concentration of 5 mg·L−1 to 0.006 mg·L−1 in simulated wastewater, and from 4.17 mg·L−1 in urban sewage to undetected (<0.01 mg·L−1), thus meeting the discharge requirements of the grade A standard of the Urban Sewage Treatment Plant Pollutant Discharge Standard (GB18918-2002). The adsorption process conformed to the Freundlich adsorption isothermal equation and quasi-second-order kinetic equation, and the adsorption reaction was exothermic and spontaneous. More importantly, after three lye regeneration tests, the removal rate of phosphorus in water remained above 68%, that is, the composite adsorbent could be reproducibly fabricated and recycled. The characterization results showed that the surface of the composite adsorbent was rough, with a complex pore structure. After phosphorus removal, the surface morphology of the composite adsorbent showed a similar honeycomb structure, with a P-H, P-O stretching vibration peak and a characteristic P2p peak. At the same time, the proportion of hydroxyl groups (M-OH) on the metal surface decreased after adsorption. Our findings thus demonstrate that the mechanism of phosphorus removal is mainly based on the coordination exchange reaction between phosphate and metal active sites and surface hydroxyl groups, resulting in the formation of granular phosphate deposits.

Advanced phosphate and nitrogen removal in water by La–Mg composite

Magnetically modified MgO nanoparticles as an efficient adsorbent for phosphate ions removal from wastewater

Magnetic Mg-Fe/LDH Intercalated Activated Carbon Composites for Nitrate and Phosphate Removal from Wastewater: Insight into Behavior and Mechanisms

Preferable Phosphate Sequestration Using Polymer-Supported Mg/Al Layered Double Hydroxide Nanosheets

Phosphate removal from actual wastewater via La(OH)3-C3N4 adsorption: Performance, mechanisms and applicability

Effective adsorption of phosphate using a Mg–Al–La composite from synthetic/real wastewater: adsorptive behaviour, column tests and economic evaluation

Synthesis of MgAl-LDH@ZIF-8 composites by in situ growth method for highly efficient phosphate removal

Facile synthesis of la2(co3)3-diatomite composites for the continuous removal of low-concentration phosphate

Synchronous Phosphate and Fluoride Removal from Water by 3D Rice-Like Lanthanum-Doped La@MgAl Nanocomposites

Mechanistic insight and rapid co-adsorption of nitrogen pollution from micro-polluted water over MgAl-layered double hydroxide composite based on zeolite

Needle-like Mg-La Bimetal Oxide Nanocomposites Derived from Periclase and Lanthanum for Cost-Effective Phosphate and Fluoride Removal: Characterization, Performance and Mechanism

Structural insight into the alginate derived nano-La(OH)3/porous carbon composites for highly selective adsorption of phosphate

Synthesis of Mg-Decorated Carbon Nanocomposites from Mesocarbon Microbeads (mcmb) Graphite: Application for Wastewater Treatment

NaLa(CO3)2 hybridized with Fe3O4 for efficient phosphate removal: Synthesis and adsorption mechanistic study

Advanced removal of phosphate from water by a novel lanthanum manganese oxide: Performance and mechanism

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

La-MOFs in situ loaded Al2O3 particles for effective removal of phosphate in water: characterization, application potential analysis, and mechanism

Insight into Heterovalent Metal Modification for Lanthanum Carbonate to Enhance Phosphate Removal at Trace Levels

Enhanced simultaneous removal of nitrate and phosphate using novel solid carbon source/zero-valent iron composite

Synthesis of Magnetite/lanthanum Hydroxide Composite and Magnetite/aluminum Hydroxide Composite for Removal of Phosphate.

Lanthanum-Integrated Porous Adsorbent for Effective Phosphorus Removal