Abstract:Purpose This study aims to provide a reference basis for waterproofing for the long-term safe operation of shield tunnels. Shielding subways in the long-term operation of tunnel tube seams leads to opening, dislocation and other issues, which in turn cause the tube sealing gasket to break and ultimately cause water seepage, and the existing symmetrical sealing gasket arrangement cannot meet the waterproofing requirements of the tunnel structure. Design/methodology/approach First, we carry out an indoor "one-seam" hydrostatic test to quantitatively determine the waterproofing performance of symmetric and four asymmetric arrangements of gaskets. And the arrangement with the best stability and waterproofing performance is selected. Second, we establish a three-dimensional numerical seepage model for the waterproof failure of gaskets with different arrangements, which mechanistically explains the whole course of the gradual failure of the waterproof performance of gaskets with the wedging of water. Finally, we compare and analyze the experimental results with the numerical results to verify the reliability of the different analysis methods. Findings The results of the research show that the gasket will undergo four stages: the initial stage, deformation stage, wedging stage, and breakthrough stage during the continuous wedging process of the water body. Compared with the symmetric arrangement of the gasket, the asymmetric arrangement of the effective contact part of the gasket stress wave peaks and troughs is smaller, the deformation stage of the ability to resist the deformation of the water pressure is stronger, and the role of the water pressure between the two sealing gaskets of the stress path is less likely to be damaged. Research limitations/implications The current test can't fully reproduce real engineering site conditions as it ignores factors like temperature, time and aging during waterproofing tests and lacks tests based on actual application. Only one – seam test is done, lacking research on other seams. The current seepage model has difficulty reflecting some details and needs refinement. Practical implications The study focuses on the tube sheet joint problem in underground tunnels and proposes four asymmetric gasket arrangements, which are tested and analysed using a variety of methods. The results show that the asymmetric arrangement has a slower decline in waterproofing capacity and better stability, providing a new method and basis for solving tunnel waterproofing problems. Originality/value The study focuses on the tube sheet joint problem in underground tunnels and proposes four asymmetric gasket arrangements, which are tested and analysed using a variety of methods. The results show that the asymmetric arrangement has a slower decline in waterproofing capacity and better stability, providing a new method and basis for solving tunnel waterproofing problems.

Research on the seam performance of waterproof clothing based on continuous ultrasonic welding technology

Experiments on Welded Seam Performances of C-type Fabric Membrane(PVC/PES)

Experiments on the mechanical properties and the welded seam properties of architectural membranes

Effect of ultrasonic welding process parameters on hydrostatic pressure resistance of hybrid textiles for weather protection

Investigation of the effects of different needle hole covering techniques on seam characteristics of waterproof breathable fabric

Evaluation of some physical performance properties of ultrasonic seaming, conventional seaming and sealing adhesive tape on waterproof polyester woven fabrics with polyurethane membrane

Evaluation of some physical performance properties of ultrasonic seaming, conventional seaming and sealing adhesive tape on waterproof polyester knitted fabrics with polyurethane

Hot-melt Adhesive Bonding of Polyurethane/Fluorinated Polyurethane/Alkylsilane-Functionalized Graphene Nanofibrous Fabrics with Enhanced Waterproofness, Breathability, and Mechanical Properties

Evaluation of alternative joining methods in softshell fabric types

Experimental Study on Uniaxial Tensile and Welding Performance of a New Coated Fabric for Airship Envelopes

Environmentally Friendly Waterproof and Breathable Nanofiber Membranes with Thermal Regulation Performance by One-Step Electrospinning

Environmentally friendly waterproof and breathable electrospun nanofiber membranes via post-heat treatment

Tuning the thermoregulatory and tensile performance of electrospun hydrophobic microfibers through a low-cost water doping method

Investigation of Mechanical Behavior of Weld Seams of Composite Envelopes in Airship Structures

Durable Polyurethane/SiO2 Nanofibrous Membranes by Electrospinning for Waterproof and Breathable Textiles

Research on waterproof performance and failure analysis of asymmetric arrangement of sealing gasket in subway shield tunnel

Sewing and adhesive bonding technologies for smart clothing production

The research and development of seamless knitted shapewears made of PTT filament

A Study on Tencel/LMPET–TPU/Triclosan Laminated Membranes: Excellent Water Resistance and Antimicrobial Ability

Bionic Lotus‐leaf‐structured Fluorine‐free Polyurethane by Combining Electrospinning and Electro‐spraying for Waterproof and Breathable Textiles

Ultrasonic weldability of thick and heavier nonwoven fabrics