Abstract:This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/policies/article-withdrawal). This paper was retracted at the request of the Editor-in-Chief. The editor no longer has confidence in the data presented in this paper. Following a whistle-blower complaint, an investigation indicated extensive reuse of images and data in this paper [A] from previously published [B]https://doi.org/10.1007/s13369-017-2681-1, [C] https://doi.org/10.1007/s42452-019-1587-9, [D] https://doi.org/10.1016/j.jobe.2019.101003, [E] https://doi.org/10.1016/j.jobe.2020.101522; Specifically, Figure 2 of Paper A are identical to Figure 1 of Paper B and Figure 3 of Paper C; Figure 6 of Paper A is identical to Figure 4 of Paper B; Figure 9 of Paper A is identical to Figure 7 of Paper B; Figure 11 of Paper A is identical to Figure 8 of Paper B, Figure 8 of Paper D and Figure 7 of Paper E; Figure 12 of Paper A is identical to Figure 9 of Paper B; Figure 14 and Figure 15 of Paper A are identical to Figure 13 of Paper B. The corresponding author denies any duplication or falsification and maintains that the data is different.

Retracted: Response Surface Methodology Approach to Predict the Flexural Moment of Ferrocement Composites with Weld Mesh and Steel Slag as Partial Replacement for Fine Aggregate

Retracted: Mechanical Performance Test and Numerical Simulation Analysis of Building Steel Plate and Concrete Composite Structure

Retracted: Mechanical Strength and Fatigue Fracture Analysis on Al-Zn-Mg Alloy with the Influence of Creep Aging Process

Retracted: Seismic Performance Analysis of Steel Truss Coal Conveying Trestle Based on Multisensor Data Fusion

Retracted: A Performance of a Nanofiber Polymer in Geotechnical Engineering Support

Retracted: Investigating Influences of Synthesizing Eco-Friendly Waste-Coir-Fiber Nanofiller-Based Ramie and Abaca Natural Fiber Composite Parameters on Mechanical Properties

Retracted: Evaluation of MWCNT Particles-Reinforced Magnesium Composite for Mechanical and Catalytic Applications

Retracted: Optimizing the Characteristics of the Laser Hardfacing Process Parameters to Maximize the Wear Resistance of Ni-Based Hard-Faced Deposits Using the RSM Technique

Retracted: Preparation of Porous Ceramic Building Decoration Materials by Foaming Method and Research on Nanomechanical Properties

Retracted: Molecular Dynamics Simulation Calculation Method for Elasticity and Plasticity of Metal Nanostructures

Retracted: Biosynthesis-Based Al2O3 Nanofiller from Cymbopogon citratus Leaf/Jute/Hemp/Epoxy-Based Hybrid Composites with Superior Mechanical Properties

Retracted: Numerical Simulation of Hot Stamping Forming of AZ Series Magnesium Alloys and Optimization of Die Process

RETRACTED: Alyousef et al. Durability Enhancement of Sustainable Concrete Composites Comprising Waste Metalized Film Food Packaging Fibers and Palm Oil Fuel Ash. Sustainability 2022, 14, 5253

Retracted: Influence of Sulfur and Additives on Wear of Exhaust Valve Seat of Cylinder Head

Retracted: Research on the Injection Mold Design and Molding Process Parameter Optimization of a Car Door Inner Panel

Retracted: Study on Rheological Properties of Coal Rock Containing Gas under Disturbance Conditions

RETRACTED: Effects of Minor Scandium on As-cast Microstructure, Mechanical Properties and Casting Fluidity of ZA84 Magnesium Alloy

Retracted: Application of Computer-Aided Precious Metal Materials in Electrochemistry of Ceramic Jewelry Design

WITHDRAWN: Compressive Strength, Pore Structure and Chloride Transport Properties of Alkali-Activated Slag/fly Ash Mortars

Retraction notice to “Microstructure and residual properties of green concrete composites incorporating waste carpet fibers and palm oil fuel ash at elevated temperatures” [J. Clean. Prod. 144 (15 February 2017) 8-21]

Retraction notice to “Influence of electropulsing treatment on microstructure and mechanical properties of Ti-6Al-4V alloy strip with lamellar microstructure” [Mater. Sci. Eng. A 622 (2015) 1−6](S0921509314013422)(10.1016/j.msea.2014.11.003)