Abstract:As a class of underactuated systems, cooperative dual rotary crane systems (DRCSs) are widely used to complete the task of large payload transportation in complex environments, since the working capacity of single cranes is quite limited. However, the control issues of DRCS fail to receive enough attention at present. Compared with single cranes, DRCSs contain more state variables, geometric constraints, and coupling relationships. Therefore, the complex kinematic and dynamic characteristics make controller design/stability analysis very challenging for DRCS. In order to solve these problems, based on the dynamic model of DRCS established by Lagrange's method, an output feedback control method with consideration for actuator constraints is designed to realize accurate dual boom positioning and rapid elimination of payload swings. The stability of the equilibrium point for the closed-loop system is analyzed by using Lyapunov techniques and LaSalle's invariance principle. To the best of our knowledge, this article yields the first solution for effective control of DRCS, which needs no velocity feedback, respects the actuator constraints, and is designed and analyzed without linearizing the complicated nonlinear dynamic equations. Finally, a series of hardware experiments on a self-built experimental platform is carried out to illustrate the effectiveness of the proposed controller. Note to Practitioners—This article is motivated by the control problem of dual rotary boom crane systems. In order to meet industrial requirements, the masses and volumes of to-be-hoisted cargoes are larger than before, and consequently, dual-crane systems are more frequently needed to fulfill transportation tasks. For such systems, although they improve the load capacity, greater challenges are caused when eliminating cargo swings in the transportation process. To t-e best of our knowledge, current control methods are mainly designed based on linearized/reduced models, whose performance may be not satisfactory when swing angles are large. Moreover, most methods use velocity signals with unexpected noises and ignore the constraints of actuators' amplitudes, which may not be feasible in practical applications. To solve these problems, this article presents an output feedback controller, which can simultaneously solve the problems of saturation constraints and velocity signal unavailability. The proposed controller can guarantee accurate boom positioning and cargo swing elimination with guaranteed theoretical proof. Furthermore, the control performance is verified experimentally on a self-built testbed. In future efforts, we intend to apply the presented control method to industrial applications.

Dynamic Response of an Overhead Crane with Anti-Swing Controller in Driving Force and Energy Consumption

A De Based Pid Controller For Two Dimensional Overhead Crane

Research on anti-swing control strategies for three-dimensional overhead cranes with non-stationary enhanced swing angle suppression

PID-like Coupling Control of Underactuated Overhead Cranes with Input Constraints

Adaptive Neural Networks Control and Learning for Overhead Crane Systems

Decoupled linear model and S-shaped curve motion trajectory for load sway reduction control in overhead cranes with double-pendulum effect

Improvement of boom control performance for hybrid hydraulic excavator with potential energy recovery

Research on adaptive coupling trajectory tracking anti-swing control strategy for three-dimensional double-pendulum overhead crane

Modeling and energy-based sway reduction control for tower crane systems with double-pendulum and spherical-pendulum effects

Adaptive Anti-Swing Control for 7-DOF Overhead Crane With Double Spherical Pendulum and Varying Cable Length

Nonlinear Antiswing Control for Crane Systems With Double-Pendulum Swing Effects and Uncertain Parameters: Design and Experiments

Design of Load's Anti-Swing Control System of Overhead or Gantry Crane Based on DSP

Anti-swing Control for 2-D Under-Actuated Cranes with Load Hoisting/lowering: A Coupling-Based Approach.

An Adaptive DE Algorithm Based Fuzzy Logic Anti-swing Controller for Overhead Crane Systems

Dynamic analysis and swing suppression method of a "Mooring-HLC-Cargo" coupled system

A novel payload swing control method based on active disturbance rejection control for 3D overhead crane systems with time-varying rope length

Improved dynamic sliding mode control for plate hoisting of cable crane under wind load

Nonlinear Motion Control of Complicated Dual Rotary Crane Systems Without Velocity Feedback: Design, Analysis, and Hardware Experiments

Dynamic Analysis and Improvement of the Electrohydraulic System under Power Limitation Control.

Linear Active Disturbance Rejection Control for Double-Pendulum Overhead Cranes

Lyapunov approach for the control of overhead crane systems with double-pendulum dynamics and uncertain disturbances