Introducing the Rankine vortex method for drag reduction in wall-bounded turbulent flows at low Reynolds number through streamwise vortex manipulation

Atilla Altıntaş

DOI: https://doi.org/10.1063/5.0184434

IF: 4.6

2024-02-01

Physics of Fluids

Abstract:It is well known that the near-wall streamwise vortices, together with the streaks, are the most important turbulent structures closely associated with drag reduction. Weakening or modifying the streamwise vortices are, thus, general approaches in near-wall turbulent control studies. In this study, a novel approach to manipulate the flow is introduced and applied to a turbulent channel flow in order to achieve drag reduction. The idea behind the “Rankine vortex method” is to generate a force based on the statistical and geometrical information of streamwise vortices. Direct numerical simulations of a turbulent channel flow at a frictional Reynolds number, Reτ, of 180 (based on the driving pressure gradient and channel half-width) are performed. The force is applied in the vicinity of the lower wall of the channel, and the results are comparatively analyzed for the cases with and without force implemented. A drag reduction of 10% is achieved. The theoretical flow control approach presented, along with the associated analysis, has the potential to enhance our current understanding of flow control mechanisms through the manipulation of near-wall turbulence.

mechanics,physics, fluids & plasmas

What problem does this paper attempt to address?

The paper attempts to address the problem of reducing drag in wall turbulence at low Reynolds numbers by manipulating streamwise vortices in the near-wall flow field. Specifically, the authors propose a new method—the Rankine vortex method, which achieves this goal by generating forces based on the statistical and geometric information of streamwise vortices. Direct Numerical Simulations (DNS) show that this method can achieve a 10% drag reduction at a friction Reynolds number of 180.

### Main Research Background
1. **Near-wall Flow Structures**: Streamwise vortices and streak structures near the wall are the turbulent structures most closely related to drag reduction.
2. **Existing Research**: Many studies have shown that large-scale and very-large-scale motions have a significant impact on wall turbulence at high Reynolds numbers. These large-scale vortices mainly contain streamwise velocity fluctuations, and most of the streamwise kinetic energy is concentrated in these vortices.
3. **Near-wall Control**: Weakening or modifying the streamwise vortices near the wall is a common method in the study of near-wall turbulence control.

### Research Methods
1. **Rankine Vortex Method**: This method uses the statistical and geometric information of streamwise vortices to generate a force, which is applied near the lower wall of the channel to manipulate the streamwise vortices.
2. **Direct Numerical Simulations**: DNS is conducted at a friction Reynolds number of 180, comparing the cases with and without the applied force, and analyzing the instantaneous flow field and various statistical characteristics.

### Main Results
1. **Drag Reduction**: A 10% drag reduction is achieved after applying the force.
2. **Vortex Structure Changes**: After applying the force, the average vortex structure height near the wall decreases, the central strength increases, and the vortex radius is reduced by approximately a factor of 2.
3. **Streak Structure Changes**: The streamwise streak structures become shorter and weaker when the force is applied, especially in the region near the lower wall.
4. **Turbulence Production**: Turbulence production near the wall significantly decreases after applying the force, while it increases near the upper wall.

### Conclusion
This study is the first to directly use geometric information to generate forces precisely targeting vortex structures, effectively reducing drag in wall turbulence at low Reynolds numbers. By manipulating the streamwise vortices near the wall, the turbulent structures can be significantly altered, leading to drag reduction. This method provides a new perspective for further understanding flow control mechanisms.