Abstract:This study explores the toughening of fiber-reinforced composite laminates to prevent against mode 1 delamination by using a selective placement of nanosilica particles in only the out-of-tow interlaminar regions of the laminate. In place of a conventional homogenous particle distribution throughout the laminate, “selective toughening” through controlled particle deposition is examined with the objective to increase the nanosilica toughening efficiency. Using a laboratory-scale manufacturing route conceptually similar to a combined prepreg and resin-film process, uni-directional carbon fiber composite laminates containing high glass-transition temperature amine-cured Dow D.E.R. 330 epoxy are produced from both particle distribution configurations. Comparisons are made by double cantilever beam testing for mode 1 delamination fracture energy G 1C and by examination of the fracture surfaces. The results show that further nanosilica toughening efficiency is possible with local deposition and toughening compared to the conventional homogenous particle distribution throughout the laminate. For the same total nanosilica particle content in the laminate, the delamination toughening effects are maintained or improved when locally toughened in only the out-of-tow interlaminar regions. For mode 1 delamination initiation and propagation, fracture energy increases in the range of 60% over the untoughened laminates are found for the laminates with a local particle distribution. By comparison, those laminates with a conventional homogeneous particle distribution saw increase of 20–35% over the untoughened laminates. The implications of the localized toughening approach are discussed to provide further guidance in optimizing the use of nanosilica particles and particle toughening in general in composite laminates.

Interlaminar Toughening of CFRP Composites with Modified ZnO Cohesive Films

Effect of Ø 0.11 Mm Z-pinning on the Properties of Composite Laminates Via an Ultrasound Guided Insertion Process

Strengthening of Composite T-joints Using Ø 0.11 Mm Z-pins Via an Ultrasound-Guided Insertion Process

Synergistic toughening of thermoplastic particles-inorganic particles to carbon fiber reinforced epoxy resin composites

Cellulose Nanocrystal-Polyetherimide Hybrid Nanofibrous Interleaves for Enhanced Interlaminar Fracture Toughness of Carbon Fibre/epoxy Composites

Enhancing interlaminar fracture toughness of CFRP laminates with hybrid carbon nanotube/graphene oxide fillers

Synergistic toughening modification and finite element analysis of carbon fiber/epoxy resin‐reinforced composites

A Novel Epoxy Resin/CaCO3 Nanocomposite and Its Mechanism of Toughness Improvement

Flexural Stress Homogenization Effects of Interfacial Transition Layers in Modified ZrB2-Al2O3/Epoxy Composites

Maximizing Interlaminar Fracture Toughness in Bidirectional GFRP through Controlled CNT Heterogeneous Toughening

Improved Interlaminar Properties of Glass Fiber/Epoxy Laminates by the Synergic Modification of Soft and Rigid Particles

Interlaminar mechanical properties of nano- and short-aramid fiber reinforced glass fiber-aluminum laminates: a comparative study

Interlaminar microstructure and mechanical response of 3D robust glass fabric-polyester composites modified with carbon nanofibers

Enhancing interlaminar fracture toughness of carbon fiber/epoxy composites toughened by polyethersulfone resin and hybrid carbon nanotubes/graphene oxide

Enhancement of the interlaminar fracture toughness and damping properties of carbon fiber reinforced composites using cellulose nanofiber interleaves

Strengthening and Toughening Epoxy Composites by Constructing MOF/CF Multi-Scale Reinforcement

Synergistic toughening on CFRP via in-depth stitched CNTs

Enhancing mechanical properties of an epoxy resin using “liquid nano-reinforcements”

Synergistic toughening of epoxy resin by block ionomers and carbon nanofibers

Effect of locally deposited nanosilica particles on interlaminar fracture toughness of high glass-transition temperature epoxy carbon fiber-reinforced composites

Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites