Abstract:Polymer-based syntactic foams find use in the marine industry as primary structural materials due to their inherent lightweight nature and enhanced mechanical properties relative to pure HDPE. 3-D printing these materials circumvents the use of joining assemblies, enabling the production of complex shapes as standalone structures. Although the quasi-static response of these 3D printed foams has been well studied independently in recent years, their dynamic impact resistance and tolerance as potential core material for sandwich panels have not been the focus. Moreover, 3D printing is known to impart directionality in the printed syntactic foams, which may introduce failure mechanisms typically not observed in molded foams. It is therefore important to investigate the mechanics of 3-D printed syntactic foam core composite sandwich structures under impact loading and characterize their failure mechanisms for establishing dynamic impact resistance. To this end, 3-D printed syntactic foams have been developed using rasters of High-Density Polyethylene (HDPE) and Glass MicroBalloon (GMB) fillers by adopting the Fused Raster Fabrication (FFF) technique. The current study is performed to assess the impact performance of these composite foam cores based on the volume fraction of fillers and print orientation. The weight percentage of GMB fillers in printed specimens ranges from 0% to 60% in increments of 20%. This study presents the impact response of these composite sandwich panels at different energy levels, in compliance with ASTM D7136/D7136M - 20. Observations suggest that an increase in GMB % in HDPE matrix improves the impact performance in terms of the peak load of the material, but the failure behavior becomes brittle to an extent. Observing the failed specimens under a Micro-CT scanner captures the failure morphologies and helps characterize failure processes during impact. It is noticed that core materials with higher GMB content are prone to individual raster breakage and delamination at the back face, in addition to debonding between individual rasters. Specimens printed along the longer dimension (y-direction) impart more warping in the final sandwich structures than that of specimens printed along the shorter dimension (x-direction). Therefore, they are more susceptible to delamination at the back face. Addition of GMB fillers mitigate the tendency of the sandwich panels to warp.

Design of monomaterial sandwich structures made with foam additive manufacturing

Experimental investigation on 3D printed lightweight sandwich structures for energy absorption aerospace applications

Initial performance assessment of 3D printed thin walled structures for spacecraft applications

Flexural response of concurrently 3D printed sandwich composite

Foam additive manufacturing technology: main characteristics and experiments for hull mold manufacturing

Theoretical and experimental investigation of sandwich panels with 3D printed cores with GFRP composite and aluminum face sheets under 3-point bending

Continuous, Free‐Formable Sandwich Design with 3D Fiber Reinforced Core for Increased Lightweight Level of Applications in Large‐Scale Production

A Review on Different Approaches for Foam Fabrication

Architected Flexible Syntactic Foams: Additive Manufacturing and Reinforcing Particle driven Matrix Segregation

Exploring flexural behavior of additively manufactured sandwich beams with bioinspired functionally graded cores

DYNAMIC IMPACT RESISTANCE OF COMPOSITE SANDWICH PANELS WITH 3-D PRINTED POLYMER SYNTACTIC FOAM CORES

Flexural response of additive-manufactured honeycomb sandwiches for marine structural applications

Predicting failure modes of 3D-printed multi-material polymer sandwich structures from process parameters

Mechanical Performance and Failure Analysis of a 3D-Printed "Continuous Layer–Lattice Layer–Continuous Layer" Sandwich Structure

Process-Structure Coupled Simulation of Additive Manufactured Components

Aluminum Foam Sandwiches: A Lighter Future for Car Bodies

High-performance design of auxetic sandwich structures: A multi-objective optimization approach

Development of EN AW-6082 Metal Foams and Stochastic Foam Modeling for the Individualization of Extruded Profiles

Fabricating sandwich composite tubes using a new thermal expansion technique: Materials preparation and energy absorption characteristics

Experimental Investigation of the Structural Performance of Composite Structures Produced using Additive Manufacturing