Abstract:A series of borate-based porous polymer electrolytes (B-PPEs) is prepared by incorporating the copolymers containing cyclic boroxine and cyclic carbonate groups into poly(vinylidene fluoride) (PVDF) through the phase inversion method. The dense and well-interconnected pores are obtained in the polymer matrix when the content of the copolymer reached 40 wt %. The ethylene–oxygen chain segments in the copolymer can facilitate the mobility of polymer chains and form the uniform distribution of pores in the B-PPEs. The B-PPEs show an enhanced ionic conductivity of 1.32 × 10–3 S cm–1 at 30 °C, which is due to the uniform well-interconnected pores in the polymer host. The cyclic carbonate units interact with the liquid electrolyte, which could improve the electrolyte uptake capacity of the polymer matrix. Benefited from the Lewis acid–base interactions between boron moieties and the anions of the lithium salt, the lithium-ion transference number of B-PPEs is also significantly improved. Compared to the pure PVDF-based electrolyte, the Li/B-PPEs/Li cell displays a very stable polarization voltage and the long-time cycling for 1000 h at a current density of 0.2 mA cm–2. Moreover, the Li/B-PPEs/LiFePO4 cells deliver a higher capacity of 143.0 mAh g–1 at 0.2 C and 86% capacity retention after 150 cycles. The B-PPEs could be a promising candidate for enhancing the safety and electrochemical properties of lithium metal batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01724.XRD images of B-PPEs with different contents of poly(B-Vd); temperature dependence of ionic conductivity for poly(B-PEGMA)-based GPE, poly(B-Vd) and poly(B-Vd)/PVDF-based SPE; surface morphology of Li metal after cycling in Li/B-PPE0/Li and Li/B-PPE40/Li cells; charge and discharge curves of the B-PPE0-based Li/LFP cell under a current density of 0.2 C at 30 °C; and SEM image of the surface of B-PPE40 after cycling in the Li/B-PPE40/LFP cell (PDF)This article has not yet been cited by other publications.

Bacterial cellulose reinforced polymer electrolytes for lithium-ion batteries

Porous polymer electrolytes with high ionic conductivity and good mechanical property for rechargeable batteries

Bacterial Cellulose Composite Solid Polymer Electrolyte With High Tensile Strength and Lithium Dendrite Inhibition for Long Life Battery

Bacteria cellulose framework-supported solid composite polymer electrolytes for ambient-temperature lithium metal batteries

Fabrication of Borate-Based Porous Polymer Electrolytes Containing Cyclic Carbonate for High-Performance Lithium Metal Batteries

A Dual-Salt Peo-Based Polymer Electrolyte with Cross-Linked Polymer Network for High-Voltage Lithium Metal Batteries

Excellent Performances of Composite Polymer Electrolytes with Porous Vinyl-Functionalized SiO2 Nanoparticles for Lithium Metal Batteries

Carboxymethyl chitosan composited poly(ethylene oxide) electrolyte with high ion conductivity and interfacial stability for lithium metal batteries

Waterborne Polyurethane Micelles Reinforce PEO‐Based Electrolytes for Lithium Metal Batteries

PEO/hollow Mesoporous Polymer Spheres Composites As Electrolyte for All Solid State Lithium Ion Battery

A Cellulose/Polyethylene Oxide Gel Polymer Electrolyte with Enhanced Mechanical Strength and High Ionic Conductivity for Lithium‐Ion Batteries

Organic Montmorillonite Modified Polyethylene Oxide Based Polymer Electrolyte for Dendrite-Free Flexible Solid-State Lithium Metal Batteries

Polymer‐in‐“Quasi‐Ionic Liquid” Electrolytes for High‐Voltage Lithium Metal Batteries

Properties of Bacterial Cellulose/Polyvinyl Composite Membrane for Polymer Electrolyte Li ion Battery

Polyethylene Glycol Dimethyl Ether-Plasticized Poly(vinylidene difluoride)-Based Polymer Electrolytes Inhibit Dendrite Growth and Enable Stable Cycling for Lithium-Metal Batteries

Biodegradable Bacterial Cellulose-Supported Quasi-Solid Electrolyte for Lithium Batteries

Imidazolium-Type Poly(ionic liquid) Endows the Composite Polymer Electrolyte Membrane with Excellent Interface Compatibility for All-Solid-State Lithium Metal Batteries

Covalent Organic Framework Enhanced Solid Polymer Electrolyte for Lithium Metal Batteries

A multifunctional polymer electrolyte enables ultra-long cycle-life in a high-voltage lithium metal battery

A Superior Polymer Electrolyte with Rigid Cyclic Carbonate Backbone for Rechargeable Lithium Ion Batteries

A poly(1,3-dioxolane) based deep-eutectic polymer electrolyte for high performance ambient polymer lithium battery