Abstract:The braking phenomenon is an aspect of vehicle stopping performance where with kinetic energy due to speed of vehicle is transformed to thermal energy via the friction between the brake disc and its pads. The heat must then be dissipated into the surrounding structure and into airflow around the brake system. The frictional thermal field during the braking phase between the disc and the brake pads can lead to excessive temperatures. In our work, we presented numerical modeling using ANSYS software adapted in the finite element method, to follow the evolution of the global temperatures for the two types of brake discs, full and ventilated disc during braking scenario. Also, numerical simulation of the transient thermal and static structural analysis was performed here sequentially, with coupled thermo-structural method. Numerical procedure of calculation relies on important steps such that the computational fluid dynamics (CFD) and thermal analysis have been well illustrated in 3D, showing the effects of heat distribution over the brake disc. This CFD analysis helped us in the calculation of the values of the heat transfer coefficients (<em class="EmphasisTypeItalic">h</em>) that have been exploited in 3D transient evolution of the brake disc temperatures. Two different rotor designs and three different brake disc materials were tested and comparative analysis of the results was conducted in order, to derive the one with the best thermal behavior. Finally, the resolution of the coupled thermomechanical model allows us to visualize other important results of this research such as the deformations, and the equivalent von Mises stress of the disc, as well as the contact pressure of the brake pads. Following the analysis of the results obtained, we drew several conclusions from this investigation. The choice allowed us to deliver the rotor design excellence to ensure and guarantee the good braking performance of the vehicles.

Calculation and experimental study in the braking temperature of aluminum-based and cast steel brake discs

Application Status and Research Progress of Brake Disc Materials for High-speed Train

Analyzing Performance of Automobile Brake Drum in 3D Thermo-elastic Coupling Field

Numerical and experimental study of the relationship between friction area and temperature of aluminium-based brake disc

Simulation of the Friction Temperature Field for Disc Brake

Experimental Studies on the Characteristics of Temperature Field on Forged Steel Brake Discs of High-Speed Trains

Research progress of temperature field calculation of disc brake braking interface based on numerical analysis

Study on the influence of running parameters on the temperature field of disc brake on long downhill road

The Effect of Functionally Graded Materials on Temperature during Frictional Heating at Single Braking

Numerical modeling of heat generation process in a disk brake at three thermal contact conditions over an extended braking distance

Study on temperature field and surface damage characteristics of railway brake disc/pad at low temperatures

Three-dimensional CFD modeling of thermal behavior of a disc brake and pad for an automobile

Design and Thermomechanical Finite Element Analysis of Frictional Contact Mechanism on Automotive Disc Brake Assembly

Numerical Analysis and Experimental Study on Temperature Field of Brake Disc During the Air-Cooling Process

Comparative Analysis of Brake Disc Materials

The thermo-mechanical coupling method of brake disc based on dynamic convective heat transfer

The Convective Heat Transfer Characteristics on Outside Surface of Vehicle Brake Disc

Research on the Influence of Floating Brake Pad Structure on the Friction Interface Performance of Disk Brake

Thermal FEM Analysis of Passenger Railway Car Brake Discs

Evaluation of Thermal Fatigue Life and Crack Morphology in Brake Discs of Low-Alloy Steel for High-Speed Trains

Experimental and numerical study of turbulent flow and thermal behavior of automotive brake disc under repetitive braking