Abstract:A key missing technology for the emerging field of soft robotics is the provision of highly selective multidirectional tactile sensing that can be easily integrated into a robot using simple fabrication techniques. Conventional strain sensors, such as strain gauges, are typically designed to respond to strain in a single direction and are mounted on the external surface of a structure. Herein, we present a technique for three-dimensional (3D) printing of multidirectional, anisotropic, and constriction-resistive strain sensors, which can be directly integrated into the interior of soft robots. Using a carbon-nanotube-reinforced polylactic acid (PLA-CNT), both the sensing element and the conductive interconnect of the sensor system are 3D-printed. The sensor's sensitivity and anisotropy can be adjusted by controlling the air gap between printed adjacent tracks, infill density, and build orientation relative to the main loading direction. In particular, sensors printed with a near-zero air gap, i.e., adjacent tracks forming a kissing bond, can achieve a gauge factor of ∼1342 perpendicular to the raster orientation and a gauge factor of ∼1 parallel to the raster orientation. The maximum directional selectivity of this ultrasensitive sensor is 31.4, which is approximately 9 times greater than the highest value reported for multidirectional sensors so far. The high sensitivity stems from the progressive opening and closing of the kissing bond between adjacent tracks. The potential of this type of sensors and the simple manufacturing process are demonstrated by integrating the sensor with a soft robotic actuator. The sensors are able to identify and quantify the bending deformation and angle in different directions. The ability to fabricate sensors with tailored footprints and directional selectivity during 3D printing of soft robotic systems paves the way toward highly customizable, highly integrated multifunctional soft robots that are better able to sense both themselves and their environments.

A Miniature Soft Sensor with Origami-Inspired Self-Folding Parallel Mechanism

Pvdf-Based Biomimetic Sensor For Application Crawling Soft-Body Mini-Robots

A 1 Mm-Thick Miniatured Mobile Soft Robot with Mechanosensation and Multimodal Locomotion.

Three-Dimensional Printed Wearable Sensors with Liquid Metals for Detecting the Pose of Snakelike Soft Robots.

Soft Origami Optical-Sensing Actuator for Underwater Manipulation

Soft Robotic Proprioception Enhancement Via 3D-Printed Differential Optical Waveguide Design

Modular Origami Soft Robot with the Perception of Interaction Force and Body Configuration

A Magnetic Soft Robot with Multimodal Sensing Capability by Multimaterial Direct Ink Writing

Reprogrammable, intelligent soft origami LEGO coupling actuation, computation, and sensing

A fabrication strategy for millimeter-scale, self-sensing soft-rigid hybrid robots

Remotely actuated programmable self-folding origami strings using magnetic induction heating

A Multimodal Hydrogel Soft-Robotic Sensor for Multi-Functional Perception

Multi-Modal Proprioceptive Sensors Based on Liquid Metal Capable of Self-Decoupling Measurement

Computational design of ultra-robust strain sensors for soft robot perception and autonomy

Direct 3D Printing of Highly Anisotropic, Flexible, Constriction-Resistive Sensors for Multidirectional Proprioception in Soft Robots.

An intrinsically embedded pressure-temperature dual-mode soft sensor towards soft robotics

Spatial Position–Force Perception for a Soft Parallel Joint via Pressure-Deformation Self-Sensing

A Miniaturised Camera-based Multi-Modal Tactile Sensor

An Ultrawide Range, Highly Stretchable Liquid Metal Force and Strain Sensor Based on Spiral Multilayer Microfluidic Fibers

Origami-inspired Folding Assembly of Dielectric Elastomers for Programmable Soft Robots

Bioinspired Soft Pressure Sensors with Interlocked Structures Based on 3D Printing Methods