Abstract:Abstract Background Tissue healthiness could be assessed by evaluating its viscoelastic properties through localized contact reaction force measurements to obtain quantitative time history information. To evaluate these properties for hard to reach and confined areas of the human body, miniature force sensors with size constraints and appropriate load capabilities are needed. This research article reports on the design, fabrication, integration, characterization, and in vivo experimentation of a uniaxial miniature force sensor on a human forearm. Methods The strain gauge based sensor components were designed to meet dimensional constraints (diameter ≤3.5 m m ), safety factor (≥3) and performance specifications (maximum applied load, resolution, sensitivity, and accuracy). The sensing element was fabricated using traditional machining. Inverted vat photopolymerization technology was used to prototype complex components on a Form3 printer; micro-component orientation for fabrication challenges were overcome through experimentation. The sensor performance was characterized using dead weights and a LabVIEW based custom developed data acquisition system. The operational performance was evaluated by in vivo measurements on a human forearm; the relaxation data were used to calculate the Voigt model viscoelastic coefficient. Results The three dimensional (3D) printed components exhibited good dimensional accuracy (maximum deviation of 183 μ m ). The assembled sensor exhibited linear behavior (regression coefficient of R 2 =0.999) and met desired performance specifications of 3.4 safety factor, 1.2 N load capacity, 18 m N resolution, and 3.13 % accuracy. The in vivo experimentally obtained relaxation data were analyzed using the Voigt model yielding a viscoelastic coefficient τ =12.38 s e c and a curve-fit regression coefficient of R 2 =0.992. Conclusions This research presented the successful design, use of 3D printing for component fabrication, integration, characterization, and analysis of initial in vivo collected measurements with excellent performance for a miniature force sensor for the assessment of tissue viscoelastic properties. Through this research certain limitations were identified, however the initial sensor performance was promising and encouraging to continue the work to improve the sensor. This micro-force sensor could be used to obtain tissue quantitative data to assess tissue healthiness for medical care over extended time periods.

3D printed vision-based micro-force sensors for microrobotic applications

Two-dimensional, vision-based μN force sensor for microrobotics

Robotic Hands with Intrinsic Tactile Sensing via 3D Printed Soft Pressure Sensors

A PVDF based 3D force sensor for micro and nano manipulation

Recent Progress on Three-dimensional Printing Processes to Fabricate Flexible Tactile Sensors

Towards a real-time 3D vision-based micro-force sensing probe

Design, inverted vat photopolymerization 3D printing, and initial characterization of a miniature force sensor for localized in vivo tissue measurements

An Ultrasensitive 3D Printed Tactile Sensor for Soft Robotics

Multimaterial 3D Printing for Microrobotic Mechanisms

Fiber‐integrated Force Sensor using 3D Printed Spring‐Composed Fabry‐Perot Cavities with a High Precision Down to Tens of Piconewton

Photocurable Polymer-Based 3D Printing: Advanced Flexible Strain Sensors for Human Kinematics Monitoring

Integration of 3D Printed Flexible Pressure Sensors into Physical Interfaces for Wearable Robots

A Simple Method to Manufacture a Force Sensor Array Based on a Single-Material 3D-Printed Piezoresistive Foam and Metal Coating

Fully 3D printed flexible, conformal and multi-directional tactile sensor with integrated biomimetic and auxetic structure

Flexible 3D Force Sensor Based on Polymer Nanocomposite for Soft Robotics and Medical Applications

Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications

Development of a 3D Printed Structural Electronics Force Sensor

Vision-Based Cellular Force Measurement Using An Elastic Microfabricated Device

A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors

Vat Photopolymerization 3D Printing of Advanced Soft Sensors and Actuators: From Architecture to Function

Soft pneumatic actuators with integrated resistive sensors enabled by multi-material 3D printing