Abstract:In this study, methods of completing the structural conversion of partly crystalline cellulose II were studied by solid-state 13C CP/MAS NMR spectroscopy and X-ray diffraction. The study incorporated post-treatments of samples that had been mercerized or regenerated to yield somewhat crystalline cellulose II. These post-treatments used different temperatures, lower concentrations of NaOH than used in, for example, the original mercerization, and different neutralization methods. The cellulose employed was originally filter paper from wood pulp that was subsequently mercerized or dissolved and regenerated to create partly crystalline cellulose II. The variations in rate of each component were monitored at different NaOH concentrations and reaction temperatures during the treatment; these components include the crystalline and accessible surface as well as the inaccessible surface/amorphous region. Subsequently, neutralization was performed for the crystallization of cellulose II and the effects of the acid employed were also evaluated. It can be thought that controlling the partial Na-cellulose construction is important for improving the assembly of cellulose II; this is achieved by optimizing the concentration of NaOH, treatment temperature, and selection of acid for neutralization. NMR spectroscopy of the intermediate state of the NaOH detected the partial generation of Na-cellulose; further, another domain exhibited the spectrum of highly crystallized cellulose II. It is believed that the selective Na-cellulose construction in the inaccessible surface cellulose is the result of an increase in the size of cellulose II crystals. During the NaOH treatment, at a concentration of 10%, the crystallinity index evaluated by both NMR and X-ray was maximized; further, at the treatment temperature of 80 °C the crystallinity of the cellulose II evaluated by NMR improved. Moreover, the neutralization, which was conducted after the alkaline treatment with H2SO4, established the most suitable conditions for the crystallization of cellulose II.Graphic abstract Open image in new window

Role of urea in alkaline dissolution of cellulose

Dissolution of cellulose in aqueous NaOH/urea solution: role of urea

MICRO-CELLULOSE PREPARATION METHOD BASED ON UREA/NaOH DISSOLVED SYSTEM

Solubility of Cellulose in NaOH/Urea Aqueous Solution

Weak interactions and their impact on cellulose dissolution in an alkali/urea aqueous system

Participation of sodium sulfamate as hydrogen bond-donating and hydrogen bond-accepting additive in the dissolution of cellulose in NaOH aqueous solution

Efficient dissolution of cellulose in slow-cooling alkaline systems and interacting modes between alkali and urea at the molecular level

The thermodynamics study on the dissolution mechanism of cellobiose in NaOH/urea aqueous solution

Mechanism of cellulose gelation from aqueous alkali-urea solution

Dissolution of cellulose from different sources in an NaOH/urea aqueous system at low temperature

The role of urea on the dissolution of starch in NaOH–urea aqueous solutions

Enhancement of cellulose dissolution in water-based solvent via ethanol–hydrochloric acid pretreatment

Role of low-concentration acetic acid in promoting cellulose dissolution

Effect of the Dissolving Method on the Dissolution of Dissolving Pulp Cellulose Fibers with Different Dried-States in Different NaOH/Additives Aqueous Solutions

Impact of hydrogen bonding on inclusion layer of urea to cellulose: Study of molecular dynamics simulation

Chemisorption of air CO2 on cellulose: an overlooked feature of the cellulose/NaOH(aq) dissolution system

Cellulose dissolution and regeneration behavior via DBU-levulinic acid solvents

Cellulose dissolution and regeneration using a non-aqueous, non-stoichiometric protic ionic liquid system

13C NMR and XRD studies on the enhancement of cellulose II crystallinity with low concentration NaOH post-treatments

Exploring the Diffusion Behavior of Urea Aqueous Solution in the Viscose Film by ATR-FTIR Spectroscopy

Effect of temperature on the interaction of cellulose/1-allyl-3-methyl imidazolium chloride solution