Abstract:Silty sand can be prone to erosion because it is short of stability cementation materials. In recent years, various emerging soil stabilizers, especially natural organic substance and polymer, have been used to improve soil strength, water stability and ability of erosion resistance. In this study, a new type of soil stabilization additive modified carboxymethyl cellulose (M-CMC), consisting of carboxymethyl cellulose (CMC) and polyacrylamide (PAM), was developed for stabilization treatment of silty sand. A series of laboratory tests were conducted to evaluate the performance of M-CMC application on shear strength, permeability, water susceptibility and microstructure of the silty sand soil treated with additive concentration range of 0% - 1.3%. Moreover, rainfall simulation experiments were conducted to evaluate the effect of M-CMC on the erosion control of silty sand which compacted soil in a large-sized runoff (1 m2) plots. Test plot which treated with 1.1% concentration of soil stabilizer and control plot which treated with same amount of water were cured outdoor for 50 days before rainfall simulation test. Rainfall intensity was applied at 120 mm·h-1 for 60 min. Finally, a field test is performed in order to assess the practical application effect of silty sand with 1.1% M-CMC. In general, the results showed that an increase of the concentration of M-CMC resulted in an improvement in water susceptibility and shear strength but a decrease in the infiltration rate. Internal friction angle of the treated soil remarkably increased under a low M-CMC concentration (less than 0.7%), while cohesion of them sharply increased under a relatively high M-CMC concentration (larger than 0.7%). Water susceptibility of the treated samples was improved remarkably under a relatively high M-CMC concentration (larger than 0.7%). Permeability coefficient of them decreased significantly when the M-CMC concentration was increased from 0 to 0.5% and, then, from 0.9% to 1.3%. Based on the images obtained from a scanning electron microscopy (SEM), the “coating” and “netting” effects were attributable to the observed improvement of the treated soil. When a plot was protected by a thin layer of soil treated with 1.1% MCMC, its erosion resistance was greatly improved, infiltration rate of water and soil loss yield of plot decreased greatly and even though under a rainfall intensity of 120 mm·h-1. The field test with long-term monitoring (three years) confirmed the M-CMC can effectively control erosion of silty sand slopes for a prolonged period of time.

Effect of sodium methyl-silicate on the performance and structure of geopolymer

Effect of PDMS incorporation on property and microstructure of geopolymer

Effect of Organic Polymers on Mechanical Property and Toughening Mechanism of Slag Geopolymer Matrix

Utilisation of Biosilica as Active Silica Source for Metakaolin-Based Geopolymers

Matrix Wettability and Mechanical Properties of Geopolymer Cement-Polydimethylsiloxane (PDMS) Hybrids

Effect of Organosilicone on the Reaction Process of Functionalized Geopolymers

Effects SiO2/Na2O molar ratio on mechanical properties and the microstructure of nano-SiO2 metakaolin-based geopolymers

The Effect of Various Si/Al, Na/Al Molar Ratios and Free Water on Micromorphology and Macro-Strength of Metakaolin-Based Geopolymer

Early-age Deformation of Hydrophobized Metakaolin-Based Geopolymers

Mitigating drying shrinkage and enhancing mechanical strength of fly ash-based geopolymer paste with functionalized MWCNTs grafted with silane coupling agent

Effect of Styrene-Acrylic Emulsion on the Toughness and Volume Stability of Geopolymers

Mitigation of efflorescence for multi-componential geopolymer: Influence of steel slag, flue gas desulfurization gypsum and pre-curing periods

Associated Effects of Sodium Chloride and Dihydrate Gypsum on the Mechanical Performance and Hydration Properties of Slag-Based Geopolymer

Effect on Silt Capillary Water Absorption upon Addition of Sodium Methyl Silicate (SMS) and Microscopic Mechanism Analysis

Experimental study of the feasibility of using anhydrous sodium metasilicate as a geopolymer activator for soil stabilization

Effect of Sodium Hexafluorosilicate Addition on the Properties of Metakaolin Based Geopolymers Cured at Ambient Temperature

Understanding the generation and evolution of hydrophobicity of silane modified fly ash/slag based geopolymers

Effect of Water-Soluble Polymers on the Rheology and Microstructure of Polymer-Modified Geopolymer Glass-Ceramics

Impact of polymer mixtures on the stabilization and erosion control of silty sand slope

Long-term performance of silane coupling agent/metakaolin based geopolymer

The mechanism of silane-grafted sodium polyacrylate on the toughening of slag-based geopolymer: an insight from macroscopic–microscopic mechanical properties