Abstract:Geopolymer composites can be used as a proper substitute for ordinary Portland cement, which can reduce carbon dioxide (CO2) emissions and make rational use of industrial waste. In this study, an investigation of the workability and compressive strength of geopolymer composites was carried out through a series of experiments, such as slump flow test, consistency meter test and compressive strength test, to clarify the interaction mechanism among superplasticizer (SP), polyvinyl alcohol (PVA) fiber, nano-SiO2 (NS) and geopolymer composites, thereby improving the properties of engineered composites. The results showed that with the increase in PVA fiber content, the flowability of geopolymer composites decreased, while the thixotropy increased. With the increase in the NS content, the flowability of geopolymer composites first increased and then decreased, reaching its best at 1.0%, while the thixotropy was the opposite. With the increase in the SP content, the flowability of geopolymer composites increased, while the thixotropy decreased. A significant correlation between thixotropy and flowability of geopolymer composites was found (R2 > 0.85). In addition, the incorporation of single PVA fiber or NS significantly improved the compressive strength of geopolymer composites. Specifically, the compressive strength of geopolymer composites with 0.8% content PVA fiber (60.3 MPa) was 33.4% higher than that without PVA fiber (45.2 MPa), and the compressive strength of geopolymer composites with 1.5% content NS (52.6 MPa) was 16.4% higher than that without NS (45.2 MPa). Considering the synergistic effect, it is found that the compressive strength of geopolymer composites (58.5–63.3 MPa) was significantly higher than that without PVA fiber (45.2–52.6 MPa). However, the flowability and compressive strength of geopolymer composites were only slightly improved compared to that without NS. With the increase in the SP content, the compressive strength of geopolymer composites showed a trend of a slight decrease on the whole. Consequently, the results of this study may be useful for further research in the field of repair and prevention of the delamination of composite structures.

Effect of Styrene-Acrylic Emulsion on the Toughness and Volume Stability of Geopolymers

Effect of Organic Polymers on Mechanical Property and Toughening Mechanism of Slag Geopolymer Matrix

Effect of Single and Synergistic Reinforcement of PVA Fiber and Nano-SiO2 on Workability and Compressive Strength of Geopolymer Composites

Mitigation of efflorescence for multi-componential geopolymer: Influence of steel slag, flue gas desulfurization gypsum and pre-curing periods

Performances of Using Geopolymers Made with Various Stabilizers for Deep Mixing

Effect of Styrene-Acrylic Emulsion on Crack Resistance of Cement-Based Materials

Matrix Wettability and Mechanical Properties of Geopolymer Cement-Polydimethylsiloxane (PDMS) Hybrids

The Synergistic Mechanism and Stability Evaluation of Phosphogypsum and Recycled Fine Powder-Based Multi-Source Solid Waste Geopolymer

Influence of the Activator Concentration and Solid/Liquid Ratio on the Strength and Shrinkage Characteristics of Alkali-Activated Slag Geopolymer Pastes

Study on the Reinforced Properties of Geopolymer Fibers with a Sustainable Development Role

Experimental investigation on the mechanical performance and microscopic characterization of desulfurization gypsum-reinforced ternary geopolymer

Modeling and optimization of fly ash–slag-based geopolymer using response surface method and its application in soft soil stabilization

Effect of Water-Soluble Polymers on the Rheology and Microstructure of Polymer-Modified Geopolymer Glass-Ceramics

Effect of PDMS incorporation on property and microstructure of geopolymer

Understanding the role of epoxy resin and polyurethane in toughening metakaolin-based geopolymer matrix

Improving Sag Resistance in Geopolymer Coatings Using Diatomite Filler: Effects on Rheological Properties and Early Hydration

Experimental Feasibility Study of Geopolymer As the Next-Generation Soil Stabilizer

Water Consolidation Performance of Acrylic-Polymer-Modified Materials and Their Concrete Impermeability Repair Characteristics

Effect of polyacrylic resin on mechanical properties of granulated blast furnace slag based geopolymer

The mechanism of silane-grafted sodium polyacrylate on the toughening of slag-based geopolymer: an insight from macroscopic–microscopic mechanical properties

Investigation of the Impact of Geotextile Incorporation on the Mechanical Properties of Geopolymer