Abstract:Improving the performance of porous nickel-based material used widely in the energy field is necessary. Alloying and increasing the specific surface area are essential approaches. This study used rice paper (Chinese traditional calligraphy and painting paper) as biomass templates to prepare hierarchical porous Ni and Ni-Cu foils (Ni p and NiCu p ) with a thickness of about 60 μ m by impregnating and high-temperature reduction process. The Ni 3 S 2 /Ni p electrodes were prepared by an in situ-grown Ni 3 S 2 nanosheet array on the struts of Ni p via a hydrothermal process. Two modification methods using Cu-added alloying and Ni-S nanosheet growing were compared to determine their effects on the microstructure, phase, and performance in methanol oxidation (MOR) and urea oxidation (UOR). The results showed that both alloying effects and morphology control can promote MOR and UOR. Compared to the current density value of Ni p at 0.8 V, the values of the preferred Ni 10 Cu p and nanosheet array Ni 3 S 2 /Ni p increased by 24.5% and 27.3% for methanol oxidation and by 15.4% and 38.4% for urea oxidation, respectively. Adding Cu helped to improve electron transfer and facilitated the transition from Ni 2+ to Ni 3+ . The large specific surface area of Ni 3 S 2 nanosheets provided more active sites for the reaction. Compared to Ni 10 Cu p , Ni 3 S 2 /Ni p with a lower impedance value exhibits better electrocatalytic performance and stability, achieving peak current densities of 269.7 mA cm −2 (MOR) and 303.9 mA cm −2 (UOR) at 0.8 V, maintaining 91.2% (MOR) and 102.4% (UOR) of the initial peak current density after 2000 cycles. The foil electrodes obtained under both modification strategies can be used as anode material in portable cells, and might also be applied to the oxidation of other small organic molecules.

Improving electrochromic performance of porous nickel oxide electrode via Cu doping

A Facile Electrochemical Lithiation Method to Prepare Porous Nickel Oxide Electrodes with High Electrochromic Performance

High durable TiO2 electrochromic films by Ni doping

Improved Electrochromic Performance in Nickel Oxide Thin Film by Zn Doping

Towards superior nickel oxide electrochromic films using Si and Li co-doping and rapid thermal annealing

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Electrochromic Properties of Ni/NiO/rGO Nanocomposite Films Prepared by a Facile Sol-Gel Technique

Electrochromic Properties of Porous NiO Thin Films Prepared by a Chemical Bath Deposition

Synergistic enhancement of dual-color electrochromic performance in NiO/CdS quantum dots composite film

Enhanced electrochromic performance on novel W@NiO doped composite electrode via pre-annealing

The effect of copper doping on the structural, optical, and electrical properties of nickel oxide thin films for optoelectronic applications

Modulation of p‐ and n‐Type Transitions in Co3−xNixO4 Nanoparticles for Enhanced Supercapacitor Electrochemical Performance

Influence of Hf doping on structural, morphological, optical and electrochemical properties of NiO thin films: Electrochromic application

Improving the p–type conductivity of Cu2O thin films by Ni doping and their heterojunction with n–ZnO

Electrochromic Properties of Li- Doped NiO Films Prepared by RF Magnetron Sputtering

Regulation of carbon content in MOF-derived hierarchical-porous NiO@C films for high-performance electrochromism

Comparison of Modifications for Enhancing the Electrooxidation Performance of Porous Ni Foil Catalytic Electrodes Derived from Paper Templates: Cu-Added Alloying and In Situ Growth of Ni-S Nanosheets

Heteroatom-Doped Nickel Sulfide for Efficient Electrochemical Oxygen Evolution Reaction

Unveiling Nanogranular Advancements in Nickel-Doped Tungsten Oxide for Superior Electrochromic Performance

Morphology effect on the electrochromic and electrochemical performances of NiO thin films

Improving the Rate Performance of Manganese Dioxide by Doping with Cu2+, Co2+ and Ni2+ ions